topic Re: SG upgrade vA.11.15 to A.11.16 problem in Operating System - HP-UX

SG upgrade vA.11.15 to A.11.16 problem

Peter Marais — Tue, 08 Mar 2005 12:49:59 GMT

When upgrading via rolling upgrade first node from pre september to september release the node fails to go back into the cluster.
Give following error:
Warning: Unable to get local cluster configuration. Ether no cluster configuration file exists, the file is corrupt, cmclconfd is unable to run, or user root on node "psds01: doesent have access to view the configuration.

I checked the cmclnodelist file it looks fine.

When running cmquerycl -c "clustername"
it coplains about the node versions not being the same.

Re: SG upgrade vA.11.15 to A.11.16 problem

Rita C Workman — Tue, 08 Mar 2005 15:22:39 GMT

Are you certain your using the active ascii file ???

Try running cmviewconf -o .
Sometimes this has helped me..

Rgrds,
Rita

I just upgraded several servers at two sites from 11.14 go 11.16. Might help if we knew what you did...maybe we could see something from that.

Re: SG upgrade vA.11.15 to A.11.16 problem

Peter Marais — Wed, 09 Mar 2005 03:05:17 GMT

cmviewconf output:

Either binary file does not exist or user doesn't have access to view the cluster configuration.

I am logged in as root and the cmclconfig file does exist.

Re: SG upgrade vA.11.15 to A.11.16 problem

Alex Lavrov. — Wed, 09 Mar 2005 03:32:59 GMT

What do you have in cmclnodelist? IP or host names?

If you have IP, try to change in to host names and try again.

Re: SG upgrade vA.11.15 to A.11.16 problem

Peter Marais — Wed, 09 Mar 2005 07:28:29 GMT

Thanks Alex, thats just what I needed. It works now

Re: SG upgrade vA.11.15 to A.11.16 problem

Peter Marais — Wed, 09 Mar 2005 07:33:25 GMT

Change IP addresses in /etc/cmcluster/cmnodelist to node names.