topic Re: SG manager package status differs from cmviewcl in Operating System - HP-UX

SG manager package status differs from cmviewcl

Roberto Martinez_6 — Tue, 10 May 2005 07:53:10 GMT

Hi, we have SG 11.16, and SG Manager (the windows tool) installed on a pc. everything works fine, except that new packages always apear in yellow, with the "package has no failover node" message, even when the AUTO_RUN parameter is set to YES in the package .conf file. But, if I substitute AUTO_RUN for the obsolete PKG_SWITCHING_ENABLED parameter (also set to YES), the package is then shown in green. Has this happened to anyone else? Thanks in advance.

Re: SG manager package status differs from cmviewcl

Steven E. Protter — Tue, 10 May 2005 08:02:20 GMT

I have not seen this or reports like this. Are you current on SG patches? I've seen a number of issues with SG 11.16 and if its not patched its going to have some problems.

SEP

Re: SG manager package status differs from cmviewcl

Roberto Martinez_6 — Tue, 10 May 2005 08:04:33 GMT

we bought the system pre-installed, so I guess its at the right patch level. Anyway, I'll check...

Re: SG manager package status differs from cmviewcl

melvyn burnard — Tue, 10 May 2005 08:05:14 GMT

what version of Serviceguard Manager are you using?

Re: SG manager package status differs from cmviewcl

Roberto Martinez_6 — Tue, 10 May 2005 08:07:34 GMT

Service guard version:
----------------------

/usr/lbin/cmcld:
HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP32) $Revision: 75.02 $
Build date: Mon Mar 15 10:53:41 PST 2004
Build id: ibld_sg_a1116_tot
Build platform: hpux
Cluster Monitor Product $Revision: 82.2 $
Cluster Monitor Product Only $Revision: 82.2 $
Daemon
A.11.16.00 Date: 03/15/04

SG MANAGER Version:
-------------------

A.04.00 built May 4, 2004 11:29:41 AM PDT

Re: SG manager package status differs from cmviewcl

Cem Tugrul — Wed, 11 May 2005 00:17:44 GMT

Mine is ;

baan01:/usr/lbin#what cmcld
cmcld:
HP92453-02A.10.20 HP-UX SYMBOLIC DEBUGGER (END.O) $Revision: 74.03 $
Build date: Thu Sep 30 12:43:53 PDT 2004
Build id: ibld_sgops_a1114patch_makefile
Build platform: hpux
Cluster Monitor Product $Revision: 82.2 $
MC/ServiceGuard Product $Revision: 82.2 $
Daemon
A.11.14 Date: 09/30/04 Patch: PHSS_31065
NET: Version: B.11.00 $Date: 97/10/15 10:44:23 $
plumb.c + JAGae66196 Testing $Revision: 1.2.119.8 $ $Date: 97/07/21 09:54:39 $
baan01:/usr/lbin#swlist|egrep -i service
B3935DA A.11.14 MC / Service Guard
MCPS-COMMON A.01.02.00 HP Service Mission Critical Common Component
PHCO_31203 1.0 VERITAS VM Mgmt Service Provider Patch 03
PHKL_27532 1.0 ; ServiceGuard/vsar incompatibility removed
PHKL_28114 1.0 timeout; ServiceGuard TOC
PHNE_24512 1.0 NTP timeservices upgrade plus utilities
PHSS_31065 1.0 MC/ServiceGuard and SG-OPS Edition A.11.14

Re: SG manager package status differs from cmviewcl

renarios — Wed, 11 May 2005 03:30:04 GMT

Hi Roberto,

Try on the command line: cmmodpkg -e . It should enable switching. See also http://docs.hp.com/en/B5158-90024/ch07s04.html

Cheerio,

Renarios

Re: SG manager package status differs from cmviewcl

Roberto Martinez_6 — Wed, 11 May 2005 07:23:14 GMT

the command cmmodpkg works, it was just the graphical representation. Anyway, I had to re-make the package and the problem is not being reproduced now. thanks anyway.