topic Re: Upgrade to HPUX11i in Operating System - HP-UX

Upgrade to HPUX11i

Wael_4 — Tue, 03 May 2005 10:51:13 GMT

I need to upgrade(not to install from scratch) HPUX11.00 to HPUX 11i v1 (on 64bit platform)and I have an oracle server on the same host (oracle9.2i/64bit), is there any documents that is talking about this issue, will the oracle server work properly after the upgrade without prcessing any further steps? and if not what are the post upgrade procedures to make the oracle work properly after the upgrade?

Re: Upgrade to HPUX11i

Kent Ostby — Tue, 03 May 2005 10:55:15 GMT

Take a look at this thread which addressed patches for a similar upgrade scenario:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=596130

Re: Upgrade to HPUX11i

Geoff Wild — Tue, 03 May 2005 10:57:57 GMT

You will need the DBA to re-link the oracle binaries after the upgrade.

Rgds...Geoff

Re: Upgrade to HPUX11i

Wael_4 — Tue, 03 May 2005 11:01:37 GMT

But how I can relink the binaries and if there any documents that is related to this issue pleas tell me.

Regards;

Re: Upgrade to HPUX11i

Geoff Wild — Tue, 03 May 2005 12:35:13 GMT

I don't know how - you will have to contact your DBA - if you are the DBA - then contact Oracle?

Rgds...Geoff

Re: Upgrade to HPUX11i

Christian Deutsch_1 — Wed, 18 May 2005 06:42:05 GMT

Dear Wael,

Although an upgrade from HP-UX 11.00 to HP-UX 11i is possible, I wouldn't do it, especially so if you have a system already set up with all sorts of software.

Much safer to install HP-UX 11i from scratch and then the rest.

Kind regards, Christian

Re: Upgrade to HPUX11i

Steven E. Protter — Wed, 18 May 2005 07:35:52 GMT

Update/ux can work with the relink option noted above. Officially, however, Oracle puts its head in the sand. That means upgrade/ux is not supported.

If you have trouble down the road and they find out you used upgrade/ux, they can say "not supported"

That being said, they don't support Ignite server replication and I did that on my last server deployment without difficulty. I just had to learn how to withhold this fact while contacting Oracle support on the issues that came up.

Cold install of the OS then the application is the supported way. You now have enough information in this thread to proceed.

SEP

Re: Upgrade to HPUX11i

Wael_4 — Sat, 21 May 2005 02:24:43 GMT

I have found the solution to install the hpux from scratch and then restore