topic HP JetDirect and B size printing in Operating System - HP-UX

HP JetDirect and B size printing

John Downs_1 — Tue, 25 Jun 2002 14:27:53 GMT

Greetings, I have an HP5000n connected directly to the network. I just installed the latest version of HP jetdirect printer installer. Not I need to configure a B size(11x17) queue. I have a few questions: 1. When I have Jetdirect installed do I need to SAM to configure printing? 2. Do I need to configure bootp or telnet to print to it? 3. Do I need to edit one of the model files to configure it for 11X17 and correct tray for paper?

-john

Re: HP JetDirect and B size printing

Sanjay_6 — Tue, 25 Jun 2002 14:33:28 GMT

Hi John,

Depending on which tray the paper you want to print on is in, you can use the -o tray1/tray2 option with the lp command. Looks at the man paages for the printer model for more info on the options available.

If he printer model is lj4x_net, try "man lj4x_net" for the options avaiable with this model of printer.

Hope this helps.

Regds

Re: HP JetDirect and B size printing

MANOJ SRIVASTAVA — Tue, 25 Jun 2002 14:44:54 GMT

Hi John

1.Even if you start confiugring from SAM it will take you to jetadmin.

2.No just a normal network printer.

3.No this will work with -otray option if the driver is correct. man printer model , man lp for details.

Manoj Srivastava

Re: HP JetDirect and B size printing

Sanjay_6 — Tue, 25 Jun 2002 14:49:03 GMT

Hi John,

you don't have to consfigure bootp or telnet to print on a network printer. If you are into the jetadmin configuration screen choose option "3" that is add a new printe. You don't have to do anything with the 1st two options with jetadmin when you invoke jetadmin from within SAM.

Hope this helps.

Regds