topic Re: cmquerycl in Operating System - HP-UX

cmquerycl

jpcast_real — Tue, 03 Feb 2004 02:35:08 GMT

I am trying to install a single node of MC/SG 11.15 but I have a problem . Cmqerycl does not recognize the product:

hpuxserv:/etc/cmcluster> cmquerycl -v

Begin checking the nodes...
Looking for ServiceGuard nodes ...
cmquerycl : Unable to find any configuration information
hpuxserv:/etc/cmcluster> swlist -l product | grep -i serviceguard
ATS-CORE A.11.15.00 ServiceGuard Advanced Tape Services
PHKL_27532 1.0 ; ServiceGuard/vsar incompatibility removed
PHKL_28114 1.0 timeout; ServiceGuard TOC
SG-Manager A.03.00.01 ServiceGuard Java GUI
SG-Manager-Addon A.03.00.01 ServiceGuard Manager/OpenView Integration Add-on
SG-Manager-Cntl A.03.00.01 ServiceGuard Manager
ServiceGuard A.11.15.00 ServiceGuard

Re: cmquerycl

melvyn burnard — Tue, 03 Feb 2004 02:41:57 GMT

you need to supply a node name
man cmquerycl

Re: cmquerycl

Hoefnix — Tue, 03 Feb 2004 02:44:52 GMT

If no cluster is configured yet this will be the result i think.
Try:
cd /etc/cmcluster
cmquerycl -v -n node1 -C clusterA.config

Regards,
Peter

Re: cmquerycl

jpcast_real — Tue, 03 Feb 2004 02:58:07 GMT

Thank you for your help..

It was just a simple communication problem . The .rhosts was not configured . I thought that as it were just a single node this would not be necessary..

Regards

Re: cmquerycl

Hoefnix — Tue, 03 Feb 2004 03:16:37 GMT

Huu....??
I did not know that that makes a difference.
I removed my localhost from the local .rhost file of the root user and then runned the command again cmquerycl -v and it still works OK.

Could be a version difference, because I am using SG 11.14

Regards,
Peter

Re: cmquerycl

Karthik S S — Tue, 03 Feb 2004 03:24:49 GMT

Instead make a entry in ,

/etc/cmcluster/cmclnodelist

for your localhost IP.

-Karthik S S

Re: cmquerycl

James Randall — Tue, 03 Feb 2004 15:33:24 GMT

Most of the MC/SG commands do a network connection to the cluster deamon. (Even cmquerycl)

You can see if a cm* command has connected to your system in syslog.

[inetd[#####]: hacl-cfg/tcp:....etc.]

Re: cmquerycl

Srinivas Thokala_1 — Wed, 04 Feb 2004 09:37:05 GMT

Instead of making entries in .rhosts file
I would say better to create the file
/etc/cmcluster/cmclnodelist, the function is similar for MCSG and also fulfill the security policy of restrictiong 'r' commands.

-Srini