topic IP in MC/SG control script in Operating System - HP-UX

IP in MC/SG control script

SILO Storagetek — Tue, 16 Mar 2004 10:24:30 GMT

Hi guys,
I've to modify the entry IP[1] (and SUBNET[1]) in some control scripts, because the ip address have been changed. In future this ip address will change again... and here my question: I can set something like:
IP[1]=hostname
SUBNET[1]=10.0.0.0
or I can se only the real ip address?

thanx everybody
p.

Re: IP in MC/SG control script

A. Clay Stephenson — Tue, 16 Mar 2004 10:43:12 GMT

The documentation is very explicit. You must use IP Address NOT a hostname. Use of hostname here would be dangerous for many reasons. The hostname resolution could lead to ambiguous IP addressing but probably most importantly by using the IP Address itself it becomes very obvious that the IP Address complies with the subnet.

Re: IP in MC/SG control script

SILO Storagetek — Tue, 16 Mar 2004 10:50:21 GMT

thank you guy.

p.

Re: IP in MC/SG control script

Vogra — Tue, 16 Mar 2004 12:24:17 GMT

Hi,
you can user more than one IP address with it subnets... if it help you.
Vogra.

Re: IP in MC/SG control script

Paula J Frazer-Campbell — Tue, 16 Mar 2004 12:32:56 GMT

Hi

Please assign points to those members who have helped you in the past.

http://forums1.itrc.hp.com/service/forums/pageList.do?userId=BR184833&listType=unassigned&forumId=1

Paula