topic Re: cmomd andtrusted mode in Operating System - HP-UX

cmomd andtrusted mode

D Bridges — Wed, 18 Feb 2004 20:38:46 GMT

I just enabled trusted mode on both nodes in my 2 node cluster (tsconvert)

Now I cannot use sgmgr either remotely from a PC or from the server itself.

The packages are fine, up and running, the passwords in the sgmgr connect dialog have been changed.

cmomd is reporting the following:

Feb 18 18:52:10:[959]:INFO:authenprovider:userpassword:User-Password Authentication failed for root

I am sure that the password is correct, I have retyped it a few dozen times and can successfully start a session with the new password.

Any ideas? Thanks!

Re: cmomd andtrusted mode

Steven E. Protter — Wed, 18 Feb 2004 22:10:52 GMT

Your error message appears in several threads, though not exactly.

This seems to be a pam problem.

Take a look at these threads and you might get lucky.

http://search.hp.com/redirect.html?url=http%3A//forums1.itrc.hp.com/service/forums/questionanswer.do%3FthreadId%3D37558&qt=authenprovider%3Auserpassword%3AUser-Password+%2BAuthentication+%2Bfailed+%2Bfor+%2Broot&hit=1

http://search.hp.com/redirect.html?url=http%3A//forums1.itrc.hp.com/service/forums/questionanswer.do%3FthreadId%3D15808&qt=authenprovider%3Auserpassword%3AUser-Password+%2BAuthentication+%2Bfailed+%2Bfor+%2Broot&hit=4

My search
http://us-support.external.hp.com/emse/bin/doc.pl/emse/bin/doc.pl?searchtext=authenprovider%3Auserpassword%3AUser-Password+Authentication+failed+for+root&submit.x=10&submit.y=3&hpl=1&todo=search&searchcriteria=allwords&from=forums&searchcategory=ALL&rn=25&presort=rank&source=7000&esc=us-support.external.hp.com&wpa=forums1.itrc.hp.com%3A80&origin=0&chkServStor=on

SEP

Re: cmomd andtrusted mode

Stephen Doud — Thu, 19 Feb 2004 07:52:37 GMT

Change the COM server's password to 8 characters or less and see if that helps.

-StephenD.

Re: cmomd andtrusted mode

D Bridges — Thu, 19 Feb 2004 20:27:49 GMT

This fixed it:

/usr/lbin/modprdef -m \
usrpick=YES,\
rstrpw=YES,\
nullpw=NO,\
syspnpw=NO,\
syschpw=NO,\
sysltpw=NO,\
bootpw=NO,\
mintm=0,\
lftm=120,\
exptm=30,\
expwarn=10,\
umaxlntr=5,\
tmaxlntr=3,\
lntmout=30,\
maxpwln=9

/usr/lbin/modprpw -V

Thanks!

Re: cmomd andtrusted mode

Stephen Doud — Mon, 23 Feb 2004 08:07:01 GMT

Seems the fix was to make the password no longer than 9 characters... or did I miss the point?

-SD.

Re: cmomd andtrusted mode

D Bridges — Mon, 23 Feb 2004 09:28:45 GMT

Hi Stephen,

Well, it is probably me that missed the point. I'm a bit new to the SG HPs, and was confused by your response.

I have asked our HP sys admin here and searched on COM server on the hp site with no luck.

The settings I listed were developed for a set of customer requirements. When I applied them the problem went away, but I am not really sure which of the settings fixed it.

I originally ran into the problem by putting an rp7410 into trusted mode and leaving system defaults as is. After applying the password database settings above the problem was resolved.

Re: cmomd andtrusted mode

Frederyk Nguyen — Mon, 05 Apr 2004 14:04:39 GMT

Hi,

Nothing to do with your question.
Could some body telle me what is cmomd.

Tx