topic Re: rpcbind errors in Operating System - HP-UX

rpcbind errors

Donovan Israel Murray — Wed, 26 Jun 2002 16:26:49 GMT

Hi:

I am getting the following error message repeatedly in my syslog.log file:

Server1 rpcbind:svc_tli_create:t_getname failed;T_IDLE.

Any ideas on what is causing this?

Rgds

Re: rpcbind errors

S.K. Chan — Wed, 26 Jun 2002 16:40:53 GMT

Extracted from DocID KBRC00000235..
If you're running pre-released version of HP-UX 11.0, it says the messages are merely informational. Anyway take a look ..

http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000046710653

Re: rpcbind errors

Craig Rants — Wed, 26 Jun 2002 16:41:14 GMT

This may or may not be your answer. But the issue does exist.

rpcbind messages in /var/adm/syslog/syslog.log at bootup DocId: KBRC00000235 Updated: 12/10/99
5:29:37 AM

PROBLEM
We get the following messages in /var/adm/syslog/syslog.log at bootup:
rpcbind: init_transport: check binding for ticlts
rpcbind: svc_tli_create: t_getname failed; T_IDLE
rpcbind: svc_dg_create: could not get transport information
rpcbind: init_transport: Could not create rmtcall fd for ticlts
rpcbind: init_transport: check binding for ticotsord
rpcbind: init_transport: check binding for ticots
We installed the latest ONC cumulative patch, but it did not help.

RESOLUTION
This is a known issue. The rpcbind messages in /var/adm/syslog/syslog.log are
informational messages that were in the pre-released version of HP-UX 11.0 for
debugging purposes. As long as there are no problems with rpcbind or NFS, then
these messages can be ignored. Enhancement Request 5003454025 is being
considered to remove those messages.

GL,
C