topic Re: cmdeleteconf in Operating System - HP-UX

cmdeleteconf

Filippo De Nardis — Wed, 16 Jun 2004 08:56:16 GMT

a command #cmdeleteconf is be accidentally launched on a node of a cluster and it seems that the cluster is not configured now. It's possible to recover the configuration? THZ and excuse me for the english.

Re: cmdeleteconf

Todd McDaniel_1 — Wed, 16 Jun 2004 09:05:27 GMT

cmdeleteconf - Delete either the cluster or the package configuration

I see one saving grace...cmgetconf.

from the man page.

To generate the cluster ASCII configuration file for clusterA, and
store the information in clusterA.config, do the following:

cmgetconf -c clusterA clusterA.config

To generate the package ASCII configuration file for pkg1, and store
the information in pkg1.config, do the following:

cmgetconf -p pkg1 pkg1.config

Re: cmdeleteconf

Ashwani Kashyap — Wed, 16 Jun 2004 09:05:34 GMT

cmdeleteconf onlty deletes entry from the bin file and not from the ascii files .
So all your ascii fiels should still be there on all your nodes .

Just reapply them using cmapplyconf and bring up your cluster .

Re: cmdeleteconf

Geoff Wild — Wed, 16 Jun 2004 09:11:01 GMT

Just reapply with cmapplyconf

Rgds...Geoff

Re: cmdeleteconf

Victor Fridyev — Wed, 16 Jun 2004 09:12:47 GMT

Hi,
AFAIK, cmdeleteconf removes only /etc/cmcluster/cmclconfig file. Try to restore it from a backup, otherwise you'll have to do the following:
In order to restore cluster one have to find the ascii file, which was created by cmqyerycl command (usually in /etc/cmcluster) and a list of the cluster packages. If the ascii file can't be found, it might be easily recreated by the command
cmquerycl -C /etc/cmcluster cluster.ascii -n node1 -n node2 -n node 3 etc.

The cluster.ascii file should be edited in order to change cluster name and max number of packages.

List of packages, if it's not found, can be created without big problems. It looks like this:
/etc/cmcluster/PACKAGE1DIR/PKG1NAME.conf
/etc/cmcluster/PACKAGE2DIR/PKG2NAME.conf
etc.

HTH

Re: cmdeleteconf

Sridhar Bhaskarla — Wed, 16 Jun 2004 09:28:12 GMT

Hi,

It should have prompted you to respond to actually delete the configuration.

You can simply reapply the configuration.

#for the cluster - replace cmclconfig.ascii with whatever the name you gave for the cluster configuration

cmapplyconf -C /etc/cmcluster/cmclconfig.ascii

#For each of the packages. Replace pkg.conf with your package configuration file.

cmapplyconf -P /etc/cmcluster//pkg.conf

-Sri