topic Re: WARNING while halting the package/cluster. in Operating System - HP-UX

WARNING while halting the package/cluster.

Rajesh SB — Tue, 03 Sep 2002 11:51:14 GMT

Hi,

We are using MCSG on HP K570 servers. When we are halting the package, we are getting the following error:

WARNING: IP 193.1.1.9 is already configured on the subnet 193.1.1.0

here, 193.1.1.9 is our package IP & 193.1.1.0 is the subnet.

Thanks in advance for the valuable tips,
Regards,
Rajesh.S.B.

Re: WARNING while halting the package/cluster.

Dirk Wiedemann — Tue, 03 Sep 2002 12:05:02 GMT

Hi,

starting and stoping packages is controlled by the script
/etc/cmcluster/pack_name/pack_name.cntl
check in the same directory the logfile packagename.cntl.log for further informations.
regards
Dirk

Re: WARNING while halting the package/cluster.

John Palmer — Tue, 03 Sep 2002 12:16:18 GMT

Hi,

The package control script only outputs this message when it attempts to ADD the IP address at package start (see function add_ip_address).

Are you sure that this message was produced at package close?

If it was then I suggest that you check the control script for possible typos that could affect the logic. Have you modified it recently?

Please post your package control script and the relevant section of the package log file.

Regards,
John

Re: WARNING while halting the package/cluster.

Jeff Schussele — Tue, 03 Sep 2002 12:39:14 GMT

Hi Rajesh,

You need to check your control file for that package. /etc/cmcluster/pkg_name
Look for the remove_ip_address function & verify that the cmmodnet command is using -r (remove) & NOT -a (add) in that function.

I suspect that's your culprit.

HTH,
Jeff