topic Re: Node 1 is not a cluster member in Operating System - HP-UX

Node 1 is not a cluster member

yc_2 — Thu, 28 Feb 2002 13:20:11 GMT

Hi,

In a 2 node cluster. After pkg has failed over from Node1 to Node2, I stopped the pkg in Node 2. Now I want to re-start in Node1, got message:
Node 1 is not a cluster member.

Any help is appreciated.

YC

Re: Node 1 is not a cluster member

Corthouts Carlo — Thu, 28 Feb 2002 13:33:49 GMT

Hi,

Have you checked the Node_Switching_Parameters.

Maybe node 1 is disabled for switching, this would prevent from moving the package back to node 1.

Re: Node 1 is not a cluster member

yc_2 — Thu, 28 Feb 2002 13:35:22 GMT

Hi,

Is a false alarm, I forgot to start the cluster process after I rebooted the system.

Thanks

Re: Node 1 is not a cluster member

Sanjay_6 — Thu, 28 Feb 2002 13:37:47 GMT

Hi,

First start the cluster services on node1. Check if the node1 is active as a cluster member or not. run,

cmviewcl -v

Check the status of node1.

If node1 is not a member of the cluster at present, run the cluster services on node1,

on node1

cmrunnode -v

Once the cluster services has started on node1, If you want to bring the package back from node2 to node1, shutdown the package on node2,

cmhaltpkg -v package_name

Now enable package switching for this package,

cmmodpkg -e package_name

The package shutdown now start on node1 (default node for this package).

Can you post your cmviewcl -v output if you still have a problem.

Hope this helps.

Regds

Re: Node 1 is not a cluster member

melvyn burnard — Thu, 28 Feb 2002 13:42:45 GMT

to prevent that minor mistake in future, edit /etc/rc.config.d/cmcluster and change the variable AUTOSTART_CMCLD from 0 to 1
This will tell the server to rejoin the cluster on reboot.