topic Re: Perl in Operating System - HP-UX

Perl

Don Bentz — Tue, 10 Aug 2004 15:14:30 GMT

In obtaining the "Security Patch Check" software, I note there are 2 distinct versions of Perl mentioned as prerequisites:
HP-UX 11.00 PA-RISC version 5.8.0 is noted as being required for https and
HP-UX 11.00 PA-RISC version 5.6.1 is noted as being necessary for security_patch_check. Can somebody tell me whether loading 5.8.0 satisfies the requirement for "5.6.1 or above"?

Re: Perl

Dave Olker — Tue, 10 Aug 2004 15:30:52 GMT

Hi Don,

Yes, loading Perl 5.8.0 should resolve both requirements.

Typically you'll see confusing messages like these when different labs are involved with developing the various components of a bundled product like the Security Patch Check. While one lab develops one component of the bundle, they certify on one version of Perl. Meanwhile a different lab develops the other component using a different version of Perl. Both labs state which version of Perl they used during development and testing. Really what they're saying is "this is the version we used when we wrote and tested the tool, so you need to be at least on this version to use the tool". The assumption is that a later version of Perl would still work, but they've only tested using the version they listed.

Hope this helps,

Dave

Re: Perl

Don Bentz — Tue, 10 Aug 2004 15:34:11 GMT

Thanks Dave. The other part that was confusing was (and I REALLY never understood what this is about) the fact the versions are: D.5.8.0 and B.5.6.1.

Re: Perl

Steven E. Protter — Tue, 10 Aug 2004 15:42:58 GMT

Either version of perl will work just fine for Security Patch check.

I've run it on both, without any issues.

Loading 5.8.0 does satisfy the 5.6.1 above requirement since 5.8 is a later version than 5.6.1

The latest perl from http://software.hp.com is the BEST thing to use.

SEP