topic Re: Service Guard configuration in Operating System - HP-UX

Service Guard configuration

Lee Abell — Thu, 04 Apr 2002 16:25:28 GMT

I am running cmquerycl to begin my service guard configuration. I have a 2 node cluster and I am getting the following error message. The node that it is getting the permission denied message on is the node that I am running the command from. Any thoughts??

hp59:/root # cmquerycl -v -C /etc/cmcluster/cmclconf.ascii -n hp59 -n hp58

Begin checking the nodes...
Looking for other clusters ... Done
Permission denied to hp59
Permission denied to hp59
Error: Unable to establish communication to node hp59
Failed to gather configuration information.

Re: Service Guard configuration

Duncan Edmonstone — Thu, 04 Apr 2002 16:30:09 GMT

ensure that the file /etc/cmcluster/cmclnodelist exists with permission 444 and contains:

hp59 root
hp58 root

HTH

Duncan

Re: Service Guard configuration

Duncan Edmonstone — Thu, 04 Apr 2002 16:30:57 GMT

And I shoulf have added it needs to be on both servers...

Duncan

Re: Service Guard configuration

Vijeesh CTK — Thu, 04 Apr 2002 16:32:08 GMT

hi ..

IN the .rhosts file of hp59 and hp58 u have to ptu necessray entries..
----------
.rhosts ( hp59 & hp58 )

hp58 root
hp59 root
------
and in the /etc/hosts also shud be properly addressed.

CTK

Re: Service Guard configuration

Sridhar Bhaskarla — Thu, 04 Apr 2002 16:33:12 GMT

On the node you are running from. If you are using .rhosts, then make sure this host is permitted in it's own .rhosts too.

hp58 root
hp59 root

-Sri

Re: Service Guard configuration

Helen French — Thu, 04 Apr 2002 16:34:19 GMT

Hi Paula,

Check this out:

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=915156e5189dd9bed6/screen=ckiDisplayDocument?docId=200000058849667

HTH,
Shiju

Re: Service Guard configuration

James R. Ferguson — Thu, 04 Apr 2002 16:35:04 GMT

Hi Paula:

You suspect that you need to setup either a '.rhosts' or 'cmnodelist' file.

Regards!

...JRF...