topic Re: MCSG:Must I declare vgxx ..... in Operating System - HP-UX

MCSG:Must I declare vgxx .....

Matrah — Mon, 24 Sep 2001 12:43:51 GMT

Hi all,
I'd like to know if i must to declare the name of my VG in the /etc/cmcluster/cmclconf.ascii ?
Thanks for your replies..

Re: MCSG:Must I declare vgxx .....

Santosh Nair_1 — Mon, 24 Sep 2001 12:45:49 GMT

Yes, you have to declare all the VGs associated with each of the packages in the cluster.ascii file.

-Santosh

Re: MCSG:Must I declare vgxx .....

Mark van Hassel — Mon, 24 Sep 2001 12:49:31 GMT

Hi,

You don't have to, but it is better to do it for administration purposes. When you enter your vg's in the config file, the vg's will be made cluster aware when you apply the config. If they are not in the config file, you have to do this manually: vgchange -c y vg...
Please note that the lock volume group, when used, must be added to the config file.

Re: MCSG:Must I declare vgxx .....

Animesh Chakraborty — Mon, 24 Sep 2001 13:01:26 GMT

hi,
not really.
But in PKG config file if that vg is part of your package.

regards
animesh

Re: MCSG:Must I declare vgxx .....

Stephen Doud — Wed, 26 Sep 2001 12:49:23 GMT

You must declare that VG in the cluster.ASCII or future cmapplyconf's will not load the current cluster ID on that VG - rendering it unactivatable by a vgchange command.

Re: MCSG:Must I declare vgxx .....

Sanjay_6 — Wed, 26 Sep 2001 13:02:56 GMT

Hi Matrah,

You must declare the VG in the ascii configuration before before applying the cluster config if that VG is going to be part of the Cluster package. In case you miss a VG and want to do that, you can still add the VG once the cluster is running.

Have a look at the thread below to see what you can for reconfiguring a runnig cluster.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B3936-90045/B3936-90045_top.html&con=/hpux/onlinedocs/B3936-90045/00/00/49-con.html&toc=/hpux/onlinedocs/B3936-90045/00/00/49-toc.html&searchterms=add%20vg&queryid=20010926-070444

Hope this helps.

thanks