topic Re: users and printers replication in Operating System - HP-UX

users and printers replication

Bruno DESQUESNE — Mon, 05 Nov 2001 10:29:22 GMT

Hello,

I am building a Service Guard cluster with 3 K580 servers running HPUX 10.20 (named A, B and C).
A is hosting users from three european countries.
B is hosting users from three other european countries.
C will act as a fail-over machine for either A or B.

Even if I do not plan to have C hosting A and B users at the same time, I need to replicate on a daily basis users from A and B. Some users are defined with the same logon and UID on both A and B.

I also have to replicate printer definitions as well.

Does somebody have a solution without NIS+ ?

TIA

Bruno

Re: users and printers replication

Rainer von Bongartz — Mon, 05 Nov 2001 12:02:24 GMT

Replicating printers is best done with
/usr/sam/lbin/lpmgr -S -xsavedir=/var/sam/lp
then copy /var/sam/lp to the remote node and there run

/usr/sam/lbin/lpmgr -R -xsavedir=/var/sam/lp

Reagrds
Rainer

Re: users and printers replication

Roger Baptiste — Mon, 05 Nov 2001 13:09:04 GMT

If this are trusted systems, i wouldn't suggest NIS+, since both do not coexist easily.
Even if it is only NIS+, i wouldn't suggest
it considering the pain of maintaining on
top of a cluster environment.

For user changes, you can easily set up
scripts to monitor the changes to the password
files on a regular basis and keep the systems
updated accordingly. Same applies for
printer.

-raj

Re: users and printers replication

Bruno DESQUESNE — Wed, 07 Nov 2001 10:47:55 GMT

Thanks for your contributions.

I forgot to tell that I am using "Trusted system". This is one of the reason for which I do not want to use NIS+.

Sure, with this option, users replication from two servers to a third one is not obvious. I let this topic open

Best regards

Bruno