https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086881#M736286 Other than Luk's suggestion this may just be that 1 in 100 chance the the the FW update process croaked and you are left with a non-functioning MP.<BR /><BR />Time to call HP for replacement.<BR /> Tue, 16 Oct 2007 09:15:42 GMT Tim Nelson 2007-10-16T09:15:42Z https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086879#M736284 I was performing an upgrade for the MP firmware on RX2600 when suddenly the connection timed out. <BR />The MP was down even from console. When i tried to RESET the MP by pushing the button for more than 4 seconds the system started to led RED.<BR />I tried to reboot but all i could receive is:<BR />- Red system light<BR />- Level 2 Red light <BR />- Six successive beeps<BR />and the system hangs out with no boot, no vga, no console display.<BR />Any ideas? Tue, 16 Oct 2007 08:56:24 GMT https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086879#M736284 C.I.S 2007-10-16T08:56:24Z https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086880#M736285 Have you disconnected the power supply cables?<BR />Try this and reconnect them after 10 seconds Tue, 16 Oct 2007 09:08:56 GMT https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086880#M736285 Luk Vandenbussche 2007-10-16T09:08:56Z https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086881#M736286 Other than Luk's suggestion this may just be that 1 in 100 chance the the the FW update process croaked and you are left with a non-functioning MP.<BR /><BR />Time to call HP for replacement.<BR /> Tue, 16 Oct 2007 09:15:42 GMT https://community.hpe.com/t5/operating-system-hp-ux/rx2600-not-booting/m-p/4086881#M736286 Tim Nelson 2007-10-16T09:15:42Z