https://community.hpe.com/t5/operating-system-hp-ux/installing-error-message/m-p/4060120#M737241 I'm reinstalling HP-UX 11.00 in the server hp 9000 K class from the DVD drive.I used the Advenceved option to configure the parameters. After setting all the parameters i start the installation by enter the GO!field. The warrning message as "the disk was not empty....." was display and I contnued the installation. When it has started creating the volume groups, it began to display the following message: <BR />(LVM: PV0 has been returned to vg[0]<BR />LVM: vg[0]:pvnum=0(dev_t=0x1f003000)and nothing is done<BR />Please help me<BR /> Fri, 24 Aug 2007 13:14:34 GMT wali chabi 2007-08-24T13:14:34Z https://community.hpe.com/t5/operating-system-hp-ux/installing-error-message/m-p/4060120#M737241 I'm reinstalling HP-UX 11.00 in the server hp 9000 K class from the DVD drive.I used the Advenceved option to configure the parameters. After setting all the parameters i start the installation by enter the GO!field. The warrning message as "the disk was not empty....." was display and I contnued the installation. When it has started creating the volume groups, it began to display the following message: <BR />(LVM: PV0 has been returned to vg[0]<BR />LVM: vg[0]:pvnum=0(dev_t=0x1f003000)and nothing is done<BR />Please help me<BR /> Fri, 24 Aug 2007 13:14:34 GMT https://community.hpe.com/t5/operating-system-hp-ux/installing-error-message/m-p/4060120#M737241 wali chabi 2007-08-24T13:14:34Z https://community.hpe.com/t5/operating-system-hp-ux/installing-error-message/m-p/4060121#M737242 after you say GO it will list the disks/paths whihc are going to be over written. are u getting the right disks/path there? Sat, 25 Aug 2007 01:36:46 GMT https://community.hpe.com/t5/operating-system-hp-ux/installing-error-message/m-p/4060121#M737242 skt_skt 2007-08-25T01:36:46Z