topic Re: script interface in Operating System - HP-UX

script interface

vanesse — Wed, 29 Aug 2007 00:55:17 GMT

how change the script of interface of printer to choose the receptacle 1 or 2 or 3 of a printer

Re: script interface

Wim Rombauts — Wed, 29 Aug 2007 01:48:26 GMT

I think it depends on the printer the the lp-interface you use on your system.
Is it a direct-attached printer ?
Is it network-attached ? If so, do you use hpnpl ? And if so, what model-script have you chosen ?

Re: script interface

vanesse — Wed, 29 Aug 2007 02:01:49 GMT

I use sam to define the printer, and I shall like to change script /etc/lp/interface/printer to use the receptacle 1 2 or 3. It is a "ricoh" printer and the command in the script /etc/lp/interface/printer is "lpr".

Re: script interface

Peter Nikitka — Wed, 29 Aug 2007 02:13:15 GMT

Hi,

there is no 'lpr' command in HP-UX, I think. What is your OS? Which version?

mfG Peter

Re: script interface

vanesse — Wed, 29 Aug 2007 02:16:51 GMT

sorry !!

the command is "rlp"

Re: script interface

Peter Nikitka — Wed, 29 Aug 2007 03:18:11 GMT

Hi,

there is no possibility to transfer custom options via rlp - this must be done in the original (=remote) model script.
If you are able to define three different logical printers on the ricoh, having hardcoded option 1,2 or 3, then you can connect them one-to-one to 'remote printer' definitions on the HP host.

mfG Peter