topic Dynamic CPU configuration in Operating System - HP-UX

Dynamic CPU configuration

Melvin M. — Tue, 04 Sep 2007 15:47:55 GMT

I'm trying to create a DB in on a machine running HP-UX 11.32. When I run my script to create the oracle db it core dumps. The reason I'm told by oracle support is that I need to enable dynamic cpu configuration. The oracle software adds cpu's using vpar which causes the core dump. Does anyone know what would be the actual setting/command they are talking about?Thanks in advance.

Re: Dynamic CPU configuration

Torsten. — Wed, 05 Sep 2007 00:37:19 GMT

"Does anyone know what would be the actual setting/command they are talking about?"

I would ask them what they are talking about ...

At this point I don't even know if you are using vPars or not.

Re: Dynamic CPU configuration

Amit Parui — Wed, 05 Sep 2007 02:26:14 GMT

Hi Melvin,

Are you working on a vpar? If yes, just check the configuration of your partitions and cpu configurations through -

vparstatus -v

Hope this helps, just tell what you get after issuing the above command.

Re: Dynamic CPU configuration

Melvin M. — Wed, 05 Sep 2007 10:23:52 GMT

Hi amit,
# vparstatus -v
sh: vparstatus: not found.

I'm not working with vpars at all. I have not created any psets either. Is it possible to enable RTE on the default pset? My theory is oracle thinks one dual core is cpu is 2 processors. RTE isn't enabled and I'm not sure if this is the problem. That's the closest I can find to dynamic cpu configuration.