topic Re: Secure shell in Operating System - HP-UX

Secure shell

Fabian Briseño — Fri, 15 Sep 2006 13:47:12 GMT

Guys I installed secure shell on a server

How do I get it working?

How do I configure it ?

is ther any kind of manual out there?

Re: Secure shell

Jonathan Fife — Fri, 15 Sep 2006 13:54:53 GMT

If you installed it from the Secure Shell depot it is probably already be pre-configured and listening. Do a ps -ef | grep ssh to see. If it is not, check for a startup script in /sbin/init.d/secsh or /sbin/init.d/*ssh* and if it exists try starting it -- eg. /sbin/init.d/secsh start.

The config file is in /opt/ssh/etc/ssh_config (default location), and you can man ssh_config for more information on what the options are there.

Other than that, is there anything specific you were wanting to set up?

Re: Secure shell

Kofi ARTHIABAH — Fri, 15 Sep 2006 13:57:50 GMT

If you installed it from the depot then you should be ready to use it...

you can use man ssh for more details on using the ssh client / man sshd for the daemon etc.

you can use Chris Vail's paper (described in the thread below) to configure your environment to replace telnet/ftp and rlogin etc.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=203463

Good luck.

Re: Secure shell

Kofi ARTHIABAH — Fri, 15 Sep 2006 14:00:27 GMT

Check out the pdf manual on the hp site for more info... unless you have specific configurations in mind - in which case, share and I am sure we can help.

http://www.docs.hp.com/en/T1471-90024/T1471-90024.pdf

Re: Secure shell

Fabian Briseño — Fri, 20 Jul 2007 18:53:49 GMT

thanks guys.

Im closing this threaad now.