topic Kernel re-build is failed. in Operating System - HP-UX

Kernel re-build is failed.

Rajesh SB — Fri, 19 Jul 2002 04:59:08 GMT

Hi Expert,

When I try to re-build the kernel by adding ACC/X.25 driver, It has given error as follows.

"Cannot build a kernel using /usr/sbin/config. The standard output of
the command is shown below:
Stop.
config: make did an exit(1)
The command exitted with exitcode -71."

Can any body guess, what will be the problem? Is it required any compiler?

H/W Details : 9000/800/N4000-44
OS : HPUX 11.0
Driver Installed : Z7476AA B.03.02.00 ACC and X.25/9000 Software Bundle
Driver configuration : When I try to making in acc0 driver in.

Yours valuable inputs are highly appreciated.

Thanks in advance.

Rajesh S

Re: Kernel re-build is failed.

T G Manikandan — Fri, 19 Jul 2002 05:11:33 GMT

check this link

http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0xa206a22d6d27d5118fef0090279cd0f9,00.html

Re: Kernel re-build is failed.

Steve Steel — Fri, 19 Jul 2002 05:51:55 GMT

Hi

Make sure

Patch Name: PHNE_25926

Patch Description: s700_800 11.00 J2793B X.25 SX25-HPerf/SYNC-WAN

Creation Date: 02/03/08

Post Date: 02/03/15

Hardware Platforms - OS Releases:
s700: 11.00
s800: 11.00

Is on the machine

Steve Steel

Re: Kernel re-build is failed.

Darren Prior — Fri, 19 Jul 2002 08:52:30 GMT

Hi Rajesh,

Please confirm that all your patches are configured using:

swlist -l fileset -a state | grep -v -e configured -e \#

If any patches are shown with a status like 'installed' then they will need to be configured or possibly re-installed. If PHKL_18543 is listed in this state proceed with extreme caution - there are many forum documents discussing how to approach this particular situation.

regards,

Darren.