topic Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20 in Operating System - HP-UX

Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Mon, 19 Jun 2006 23:26:19 GMT

Hi,

Hoping someone can shed some light into an issue i've encountered while attempting to get ssh running on a D-class running HP-UX 10.20.

Depot Installation was successful however when i try to start the sshd daemon i get the following error:

root@earth:/usr/local/sbin>./sshd
/etc/ssh2/license_ssh2.dat: File not found.
License doesn't exist or is not valid.

Any ideas/suggestions welcome...

Nick

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Mon, 19 Jun 2006 23:45:13 GMT

Hi Nick,

Which version of SSH you are using ? Is it from a third party vendor or HP's Secure shell ?

You can use Procura's 10.20 build http://mirrors.develooper.com/hpux/openssh-4.0p1-10.20.sd.bz

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Mon, 19 Jun 2006 23:59:11 GMT

Hi Arun,

I got it from here:
http://ftp.ssh.com/priv/secureshell/updates-packages/4.0.7.1-unixbin-TsGGL/hp-ux/ssh2-4.0.7.1-sd-10.20.depot.gz

The one you have suggested requires bzip to be installed - where can i get taht for 10.20?

Thanks.

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Tue, 20 Jun 2006 00:07:03 GMT

Hi Nick,

Here it is, http://mirrors.develooper.com/hpux/bzip2-1.0.2-pa1.1

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 00:24:13 GMT

What type of file is it?

How do i install it?

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Tue, 20 Jun 2006 00:28:22 GMT

Hi Nick,

I think, it is possible to install with "swinstall"

# swinstall -s /bzip2-1.0.2-pa1.1 bzip2

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 00:34:14 GMT

I though it needs to be a depot inorder for swinstall to install?

ERROR below:

root@earth:/opt/bzip>swinstall -s /opt/bzip/bzip2-1.0.2-pa1.1 bzip2

======= 06/20/06 15:32:20 EST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@earth".

* Beginning Selection
* Target connection succeeded for "earth:/".
ERROR: "earth:/opt/bzip/bzip2-1.0.2-pa1.1": An I/O error occurred
while performing this task.
* Source connection failed for
"earth:/opt/bzip/bzip2-1.0.2-pa1.1".
WARNING: More information may be found in the daemon logfile on this
target (default location is earth:/var/adm/sw/swagentd.log).
* Selection had errors.

======= 06/20/06 15:32:23 EST END swinstall SESSION (non-interactive)

I also tried:

swinstall -s /opt/bzip/bzip2-1.0.2-pa1.1

no luck.... any ideas?

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 00:37:48 GMT

# tail /var/adm/sw/swinstall.log

ERROR: tar: /opt/bzip/bzip2-1.0.2-pa1.1 : This doesn't look like a
tar archive
ERROR: tar: /opt/bzip/bzip2-1.0.2-pa1.1 : Skipping to next file...
ERROR: The INDEX file on the source did not exist or could not be
read.
ERROR: The target "/opt/bzip/bzip2-1.0.2-pa1.1" could not be opened.
pid=2408 06/20/06 15:31:48 EST
* Agent pid=2408 completed. 06/20/06 15:31:48 EST
* Agent pid=2407 completed. 06/20/06 15:31:55 EST
* Started install agent on "/" for root@earth, pid=2414,
06/20/06 15:32:21 EST
* Started source agent on "/opt/bzip/bzip2-1.0.2-pa1.1" for
root@earth, pid=2415, 06/20/06 15:32:22 EST
ERROR: tar: /opt/bzip/bzip2-1.0.2-pa1.1 : This doesn't look like a
tar archive
ERROR: tar: /opt/bzip/bzip2-1.0.2-pa1.1 : Skipping to next file...
ERROR: The INDEX file on the source did not exist or could not be
read.
ERROR: The target "/opt/bzip/bzip2-1.0.2-pa1.1" could not be opened.
pid=2415 06/20/06 15:32:23 EST
* Agent pid=2415 completed. 06/20/06 15:32:23 EST
* Agent pid=2414 completed. 06/20/06 15:32:23 EST
ERROR: Failed to register soc on "bzip2-1.0.2-pa1.1" for root@earth.
"bzip2-1.0.2-pa1.1" is not a valid depot. 06/20/06 15:36:15
EST

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Tue, 20 Jun 2006 00:39:24 GMT

Hi Nick,

I dont have a 10.20 machine to check with. We have to wait till Procura gets in here.

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 00:41:07 GMT

Thanks Arun,

Any suggestions will be welcomed.

Thanks
Nick

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 00:44:06 GMT

Not sure if this will help - below is a strings of the first part of the bzip program:
=========================================
$Revision: 92453-07 linker linker crt0.o B.10.32 990409 $
/usr/lib/dld.sl
ERROR: mmap failed for dld
no data compressed.
%6.3f:1, %6.3f bits/byte, %5.2f%% saved, %s in, %s out.
compress:unexpected error
compress:end
decompress:bzReadGetUnused
decompress:bzReadGetUnused

%s: %s: trailing garbage after EOF ignored
decompress:unexpected error
decompress:end
test:bzReadGetUnused
test:bzReadGetUnused

%s: %s:
data integrity (CRC) error in data
file ends unexpectedly
bad magic number (file not created by bzip2)
trailing garbage after EOF ignored
test:unexpected error
test:end
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
Input file = %s, output file = %s
%s: Deleting output file %s, if it exists.
%s: WARNING: deletion of output file (apparently) failed.
%s: WARNING: deletion of output file suppressed
%s: since input file no longer exists. Output file
%s: `%s' may be incomplete.
%s: I suggest doing an integrity test (bzip2 -tv) of it.
%s: WARNING: some files have not been processed:
%s: %d specified on command line, %d not processed yet.
%s: PANIC -- internal consistency error:
This is a BUG. Please report it to me at:
jseward@acm.org
%s: Data integrity error when decompressing.
%s: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
%s: I/O or other error, bailing out. Possible reason follows.

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Steven E. Protter — Tue, 20 Jun 2006 01:37:04 GMT

Shalom Nick,

Perhaps unzip the file yourself prior to install.

Thoush ssh for 10.20 was long ago pulled from http://software.hp.com It is possibly on the last set of Application CD's.

You can also open a response center call and ask HP to provide you temporary access to the magic ftp server that contains old releases.

openssh.org has a version for HP-UX that you can compile.

Most D Class machines can run HP-UX 11i v1, which is still supported and can use software from http://software.hp.com

Good luck,

SEP

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 01:46:22 GMT

Steve you guru you...

Yeah i know this box is a dinasour and so is the OS etc etc :)

I have to get it going on 10.20 in readiness for an running on a production environment which can't be ported (so the applications support team tells me) to 11.+

Anyways, i have made progress, i extracted the bzipped openssh depot locally on my laptop and loaded onto the unix server, i am now downloading openssl (as the installation failed indicating this was a pre-requisite for installation (what a head ache)

I'm almost there!

Cheers,
Nick

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 02:04:41 GMT

Ggggggggrrrrrrr...

Okay installed Openssh successfully (no errors and warnings) version openssh-4.0 for 10.20 (as per this thread).

sshd daemon doesn't seem to want to start:

root@earth:/opt/ssh>/usr/local/sbin/sshd start
/usr/lib/dld.sl: Can't open shared library: /pro/local/lib/libz.sl
/usr/lib/dld.sl: No such file or directory
Abort(coredump)

Ring any bells to anyone???

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Tue, 20 Jun 2006 03:06:57 GMT

Hi Nick,

Oops, sshd daemon doesn't seem to want to start:

root@earth:/opt/ssh>/usr/local/sbin/sshd start
/usr/lib/dld.sl: Can't open shared library: /pro/local/lib/libz.sl
/usr/lib/dld.sl: No such file or directory
Abort(coredump)

You need to have Zlib installed on your 10.20. Try downloading from http://mirrors.develooper.com/hpux/libz-1.1.4-pa1.1.tgz
or http://mirrors.develooper.com/hpux/libz-1.2.1-pa1.1.tgz

After installing this, try to link to /usr/lib

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 18:44:58 GMT

Hi Arun,

Both the links supplied for zlib contain empty tar files. I extract them locally and nothing is in them, i also loaded onto the server and when i attempt to untar them i get a checksum error.

Do you have another source to get zlib?

thanks.
Nick

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 20:41:36 GMT

I have downloaded the source code for zlib (10.20) however it seems it requires gcc. Talk about opening a can of worms!

I have found gcc however it is saved as a .tbz, now if you all re-call from the beginning of this thread, i couldn't work out how bzip2-1.0.2-pa1.1 is to be installed - swinstall didn't like this file (see above)

IF anyone can shed light on all this for me i would really appreciate it.

BTW: (All this is to get ssh up and running on a 10.20 environment, and unfortunately at this stage upgrading to 11.+ is not an option.)

Nick

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Arunvijai_4 — Tue, 20 Jun 2006 22:53:08 GMT

Hi Nick,

I have downloaded the source code for zlib (10.20) however it seems it requires gcc. Talk about opening a can of worms!

I have found gcc however it is saved as a .tbz, now if you all re-call from the beginning of this thread, i couldn't work out how bzip2-1.0.2-pa1.1 is to be installed - swinstall didn't like this file (see above)

I am not sure why this is an empty depot. If you have any linux machines, download gcc there and bunzip in linux. It is easier, later you can transfer tar file to HP-UX.

-Arun

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Patrick Wallek — Tue, 20 Jun 2006 23:07:55 GMT

If I recall correctly the bzip file you downloaded is a plain executable file.

You should not really have to install it. You should be able to just copy it to /usr/local/bin, or whatever directory you want, rename it to bzip2 (if you want) and execute it.

# cd
# mv bzip2-1.0.2-pa1.1 /usr/local/bin/bzip2
# /usr/local/bin/bzip2

Re: Issues with SSH2 version ssh2-4.0.7.1 for HP-UX 10.20

Nick Zraika — Tue, 20 Jun 2006 23:17:42 GMT

Thanks Patrick - that worked.

Now i need to get gcc and the rest.

Will keep you all posted.

Thanks
Nick