topic Re: getting error when i use DBCA command.. in Operating System - HP-UX

getting error when i use DBCA command..

Ramana.Sv — Wed, 01 Aug 2007 06:31:47 GMT

When use dbca command it will below message what is this iam not getting pls.

"Set DISPLAY environment variable, then re-run"
please help me.

Thank you,
Ramana.Sv

Re: getting error when i use DBCA command..

Anshumali — Wed, 01 Aug 2007 06:33:05 GMT

export DISPLAY=:1.0
run DBCA
you should have a X-manager or exceed running.
You can try running xclock first to test it.

Re: getting error when i use DBCA command..

Yogeeraj_1 — Wed, 01 Aug 2007 07:30:41 GMT

hi,

you will need a graphics - Xwindows environment because the dbca is java-based and runs on an X-windows environment.

If you have a graphics terminal, it would be easier to launch the installation from there itself.

hope this helps!

kind regards
yogeeraj

Re: getting error when i use DBCA command..

Torsten. — Wed, 01 Aug 2007 07:45:14 GMT

IMHO, you have too many open threads ... this is just another. You already have a thread about this!

Install a X-Server application on your PC, for example this:

http://x.cygwin.com/

Now download putty:

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

From your PC, run

putty -X
or

putty -X -telnet

Once connected, run your X-application. The window will appear on your PC.
That's it.