topic Re: Migrating a database from V -class to Superdome in Operating System - HP-UX

Migrating a database from V -class to Superdome

Arun Kesavan — Wed, 01 Aug 2007 13:26:25 GMT

Hi All ,

I am having a 9000/800/V2600 server. It has the following configuration.

No of CPU : 20
CPU Speed : 552 MHZ
Memory : 20Gb

Utilization:

Average Utilization Maximum
Processor 48% 56%
RAM 64% 64%
Disk 85% 100%
Swap 44% 44%

I have to migrate the database to superdome server.its SD32A server. We are planning to create a new N-PAR.

Can anyone help in Hardware planning ,like No of cpus are required to match the 20 CPU of V-Class and memory.

Also help me on what basis the conversion of cpu from V-Class to Superdome will be done.

Expecting your valuable informations.

Regards
Arun.K

Re: Migrating a database from V -class to Superdome

Torsten. — Wed, 01 Aug 2007 15:18:18 GMT

"SD32A" says almost nothing. This is a 1 cabinet box. This could be a HP9000 with PA-RISC CPU's (PA-8800 or PA8900) or even a sx1000 Integrity with (again different) Itanium CPU's.
What do you have?

IMHO you should plan at least the same amount of memory.
You will use a higher revision of the OS - consider to plan more memory!

Re: Migrating a database from V -class to Superdome

Arun Kesavan — Wed, 01 Aug 2007 16:09:57 GMT

The SUperdome has the following:

Current config :

Model : 9000/800/SD32A
No of Partitions 1 npar
No of cell boards 4
No of I/O cards 2

Processor Details

Name PA 8800
Speed 1000 MHZ
Quantity 4 CPU /Cell .. Total 16 CPU

Memory Details

Size 24 GB /cell Total = 96 GB

Swap Size 276 GB

Server Utilization (%)
Average Max
Processor 23% 27%
RAM 28% 28%
Disk 18% 39%
Swap 5% 5%

Kindly suggest me whether i can go ahead with same npar with adding few resource.
I though of going for new NPAR,could any one help me how to go for a hardware planning.How many cpu should be added to match the no of cpu in V class.