topic K580 HSC Expander Problems in Operating System - HP-UX

K580 HSC Expander Problems

Jamie Willard_2 — Wed, 20 Jun 2007 11:16:38 GMT

I have a K580 Server running 10.20. I have recently re-installed the OS. I applied December 2001 HWE patches. My problem is that the HSC expander doesn't show up properly in IOSCAN. There are two Fiber cards on this expander. Any ideas?

bc 1 8 ccio CLAIMED BUS_NEXUS I/O Adapter
ba 0 8/0 GSCtoPCI CLAIMED BUS_NEXUS PCI Bus Bridge - GSCtoPCI
unknown -1 8/0/1/0 UNCLAIMED UNKNOWN PCI(103c1028) -- Built-in #1
ba 1 8/4 GSCtoPCI CLAIMED BUS_NEXUS PCI Bus Bridge - GSCtoPCI
unknown -1 8/4/1/0 UNCLAIMED UNKNOWN PCI(103c1028) -- Built-in #1

Re: K580 HSC Expander Problems

Mike Shilladay — Wed, 20 Jun 2007 11:19:38 GMT

Hi Jamie,

By the fact that the OS is saying it is unclaimed suggests that the kernel does not know about it. You will need to load the drivers.

Hope that helps Mike.

Re: K580 HSC Expander Problems

Jamie Willard_2 — Wed, 20 Jun 2007 12:52:59 GMT

It did. I compared it to a similair system. You are correct.