topic Re: Configuring SSH for HPUX11.11 Mission Critical in Operating System - HP-UX

Configuring SSH for HPUX11.11 Mission Critical

Faizer — Sun, 22 Feb 2004 11:34:49 GMT

Please let me know how to configure ssh and from where I could get ssh.
Thanks
Faizer

Re: Configuring SSH for HPUX11.11 Mission Critical

Sridhar Bhaskarla — Sun, 22 Feb 2004 12:05:40 GMT

Hi,

You can download HP's supported version of ssh from
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1471AA

Since yours is 11i, I suggest you download KRNG

http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=KRNG11I

The above provides a faster mechanism for generating encryption keys to be used with SSH. Otherwise you will find the initial ssh connection irritatingly slow.

A good information can be found from the FAQ here

http://www.openssh.org/faq.html

SSH can be used to automate the sessions and data transfer using 'public/private key' authentication. The following URL describes it to the best I have ever seen.

http://www.bb-zone.com/SLGFG/chapter27.html

The options to ssh-keygen may vary depending on the ssh version you use.

-Sri

Re: Configuring SSH for HPUX11.11 Mission Critical

Steven E. Protter — Sun, 22 Feb 2004 17:38:42 GMT

I'm attaching a good cookbook on generating and exchanging public keys.

You can use the cat command instead of x like it says, but I use this book every time I build a new system.

SEP

Re: Configuring SSH for HPUX11.11 Mission Critical

Ben Thomas — Mon, 23 Feb 2004 13:41:07 GMT

Sorry to be picky, but Sridhar refers to link that describes SSH1 -- which is obsolete. A better description of how to setup SSH keys can be found at http://www.arches.uga.edu/~pkeck/ssh/, written by Paul Keck (thanks Paul).

Re: Configuring SSH for HPUX11.11 Mission Critical

Sridhar Bhaskarla — Mon, 23 Feb 2004 13:43:45 GMT

Ben,

That was only for the understanding purposes of how ssh works. That's why I specifically mentioned

//
options to ssh-keygen may vary depending on the ssh version you use //

-Sri