topic can not understand some of the cstm output in Operating System - HP-UX

can not understand some of the cstm output

leelangco_1 — Wed, 23 May 2007 04:11:55 GMT

when i execute cstm>map,there are two lines i donot totally understand,output are followings:
11 0/0/0/2/1.2.0 Optical Storage Device (_ Information Warning
107 0/10 CPU (5eb) Information Killed
what is the mean of "Information Killed" and "Information Warning"?and what should i do?
thank you !

Re: can not understand some of the cstm output

Andrew Merritt_2 — Wed, 23 May 2007 05:34:58 GMT

Hi,

See the headings for those columns, e.g.:

Dev Last Last Op
Num Path Product Active Tool Status
=== ==================== =========================
1 10 Bus Adapter (582) Information Successful

'Information' tells you that the last tool run for that device was the Information tool. The 'Warning' or 'Killed' says that was the result of running the tool.

I'd suggest selecting those devices and looking at the info tool activity log and failure log for each ('ial' and 'ifl' in cstm) to see what happened. (There may not be a failure log in all cases.)

Andrew

Re: can not understand some of the cstm output

Torsten. — Wed, 23 May 2007 06:38:41 GMT

Hi,

I'm sure your "optical device" is the CD_ROM without a media, to cstm cannot read it -> warning.

Regarding the CPU:
someone killed the information tool on it.

To run it again:

echo "sel dev 107;info;wait;il"|cstm