topic Re: Boot Failed in Operating System - HP-UX

Boot Failed

kama_yus — Fri, 13 Apr 2007 02:06:15 GMT

when i boot my workstation this message was appear.

Boot/
:disc (8/12.6.0;0)stand/vmunix
3573492+319488+315968.

How to resolve this problems

Re: Boot Failed

mobidyc — Fri, 13 Apr 2007 02:20:18 GMT

Hello,

what about it?
it not seems to be an error message.

it informs you on what disc you are booted from.

Regards,
Cedrick Gaillard

Re: Boot Failed

Fabian Briseño — Fri, 13 Apr 2007 02:22:26 GMT

hello friend.

This sounds like a disc problem to me, try booting of the alternate disk if you have one.

Have you tryed booting into single user mode, if you can do it check your /var/adm/syslog/syslog.log file and post your findingd here

another possibility is that your /stand/vmunix file is corrupted there should be a file /stand/vmunix.prev, you could try to boot of that, be warned that vmunix.prev is your prior vmunix file (kernel).

Re: Boot Failed

Torsten. — Fri, 13 Apr 2007 03:58:46 GMT

Hi,

a message like this looks totally normal, another example:

...
Main Menu: Enter command or menu > bo pri
Interact with IPL (Y, N, or Cancel)?> n

Booting...
Boot IO Dependent Code (IODC) revision 0

HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux

Boot
: disk(0/1/1/0.1.0.0.0.0.0;0)/stand/vmunix
11137024 + 2080768 + 1527992 start 0x1fd3e8

alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
...

These is the hw-path to the boot disk, the current kernel and the file system entries -

where is the problem?