topic Re: pipe missing in console in Operating System - HP-UX

pipe missing in console

Jorge Pons — Thu, 01 Feb 2007 09:29:57 GMT

Hi
I dont know, but the character pipe "|" was missing. only apeard number 1. This morning works fine.

Thanks in advance, Jorge

Re: pipe missing in console

Peter Godron — Thu, 01 Feb 2007 09:37:46 GMT

Hi,
waht keyboard are you using?
Has your TERM variable changed ?
What is the result of:
cat /etc/kbdlang

Re: pipe missing in console

Steven E. Protter — Thu, 01 Feb 2007 09:38:01 GMT

Shalom,

There is a configuration mode on serial consoles.

HP for 11.00
EM100 for 11.11

The keyboard has the function keys laid out on it. Figuring this out is somewhat intuitive.

SEP

Re: pipe missing in console

Jorge Pons — Thu, 01 Feb 2007 09:38:24 GMT

The problem is only in console, itÂ´s VGA. If I do a telnet, all works fine.

I do a "itemap -Li" and configure the exact keyboard, but the problem persist

Re: pipe missing in console

Jorge Pons — Thu, 01 Feb 2007 09:45:05 GMT

Hi

# cat /etc/kbdlang
USB_PS2_DIN_Euro_Spanis#

If I do a "itemap -Li" and select number 6 (USB_PS2_DIN_Euro_Spanis_Euro) the cat of kbdlang file is the same (USB_PS2_DIN_Euro_Spanis#)
ItÂ´s normal?

I change the value of TERM for "hp" or "vt100" and the problem not solved

Re: pipe missing in console

Jorge Pons — Fri, 02 Feb 2007 04:05:03 GMT

Hi

If I open sam, when I m at command line again, then, it works. I would like to have the pipe without entry in sam previously.

any ideas?

thanks in advance