patch PHCO_20060 (envd)

Jean-Louis MATTON — Sun, 24 Oct 1999 02:32:13 GMT

Hi all,
After installed patch PHCO_20060 (envd) when the system want to start envd
daemon ( at bootup) I ave this message on rc.log:

Start environment monitoring daemon
Output from "/sbin/rc2.d/S750envd start":
----------------------------
/usr/lib/dld.sl: Invalid version for shared library: /usr/lib/libc.1
/usr/lib/dld.sl: Exec format error
/sbin/rc2.d/S750envd[46]: 901 Abort(coredump)
ERROR CODE 134
"/sbin/rc2.d/S750envd start" FAILED

what output for libc.1:
# what /usr/lib/libc.1
/usr/lib/libc.1:
PATCH/10_10 PHCO_19371 $Revision: 76.162.1.14.1.87 $

--
---------------------------------------------------------------------
live free or die
U U N N III X X
U U NN N I X X
U U N N N I X
U U N NN I X X
UUU N N III X X
---------------------------------------------------------------------
Univ of LOUVAIN
Jean-Louis Matton Cliniques St LUC
tel +32.2.764.55.98 av. Hippocrate 55/5550
fax +32.2.764.55.69 B-1200 Bruxelles
mailto:matton@card.ucl.ac.be BELGIUM
---------------------------------------------------------------------

Re: patch PHCO_20060 (envd)

Jeffrey Huff — Mon, 25 Oct 1999 13:40:13 GMT

From the quick look I did at the patches you reference, it appears you may have
a libc.1 patch that is for a 10.10 system. I assume that this is the version
you are running. If not, then that is you problem. The libc is not current
with your current system. You could back out the PHCO_20060 patch by
itself to see if the problem resolves itself. If it does, then there may be a
problem in that patch.
Also check to see if any libc patches may have been
applied in your patch run. A "swlist -l fileset -a state" will also give you
some installation info about
the status of patches installed, including the ones you
are talking about.

topic patch PHCO_20060 (envd) in Operating System - HP-UX

patch PHCO_20060 (envd)

Re: patch PHCO_20060 (envd)