Not Printing in Duplex mode from HP-UX 10.20

Sajith Mannadiar — Wed, 08 Dec 1999 12:55:59 GMT

Hi,

We have a Laserjet 5M printer with 6MB RAM configured thru Jetdirect Interface
and it is connected to Unix
workstations running HP-UX 10.20.

Whenever we print a postscript file from UNIX the printer does not print in
DUPLEX. even though the
printer's control panel says DUPLEX=ON.

Any text file printed from Unix prints in Duplex mode.

When we took out a post-script configuration page from the printer, it said
'Duplex=off' for the postscript.

We are unable to change this option to "Duplex=ON".

TO Summarise:

Hardware : Laserjet 5M & HP 9000 workstations
Software : HP-UX 10.20 & Jetadmin
Problem : Postscript documents are not prtg in Duplex mode (Any
printout taken from Netscape/Frame
Maker/Acrobat reader etc.)
What we found so far: Duplex=off in the postscript configuration

Any help on this is highly appreciated.

Thanks in advance.

Regards
Sajith

Re: Not Printing in Duplex mode from HP-UX 10.20

Dan Hull — Fri, 10 Dec 1999 17:06:57 GMT

It sounds like the problem is definitely on the printer configuration side, not
the HPUX side. Try asking in the Printing & Imaging forum :)

topic Re: Not Printing in Duplex mode from HP-UX 10.20 in Operating System - HP-UX

Not Printing in Duplex mode from HP-UX 10.20

Re: Not Printing in Duplex mode from HP-UX 10.20