https://community.hpe.com/t5/operating-system-hp-ux/xmodem/m-p/2416872#M765211 To transfer files over the modem between systems, you first need a terminal <BR />program on both sides. Next, you need a protocol that both terminal programs <BR />speak (like xmodem, ymodem, or tcp/ip)<BR /><BR />If you are transferring files between HPUX and a PC, consider using Hyperterm <BR />on the PC and Kermit on the HP. Kermit is not written by HP, but is included <BR />with the OS. It has a rather extensive man page that includes step-by-step <BR />instructions for transferring files. Fri, 17 Dec 1999 15:06:19 GMT Dan Hull 1999-12-17T15:06:19Z https://community.hpe.com/t5/operating-system-hp-ux/xmodem/m-p/2416871#M765210 I setup up my US Robotics modem on a HPUX 10.20 system to dial out. How do I <BR />use xmodem to connect to another non HPUX system to download a file? Thank you. Fri, 17 Dec 1999 11:10:17 GMT https://community.hpe.com/t5/operating-system-hp-ux/xmodem/m-p/2416871#M765210 John Olcott_1 1999-12-17T11:10:17Z https://community.hpe.com/t5/operating-system-hp-ux/xmodem/m-p/2416872#M765211 To transfer files over the modem between systems, you first need a terminal <BR />program on both sides. Next, you need a protocol that both terminal programs <BR />speak (like xmodem, ymodem, or tcp/ip)<BR /><BR />If you are transferring files between HPUX and a PC, consider using Hyperterm <BR />on the PC and Kermit on the HP. Kermit is not written by HP, but is included <BR />with the OS. It has a rather extensive man page that includes step-by-step <BR />instructions for transferring files. Fri, 17 Dec 1999 15:06:19 GMT https://community.hpe.com/t5/operating-system-hp-ux/xmodem/m-p/2416872#M765211 Dan Hull 1999-12-17T15:06:19Z