https://community.hpe.com/t5/operating-system-hp-ux/printer-control-codes/m-p/2417260#M765424 How do I insert printer control codes for an Epson printer? I want to set the <BR />page size. This is for HPUX 11.0. Wed, 05 Jan 2000 18:18:52 GMT Mitch Nguyen_1 2000-01-05T18:18:52Z https://community.hpe.com/t5/operating-system-hp-ux/printer-control-codes/m-p/2417260#M765424 How do I insert printer control codes for an Epson printer? I want to set the <BR />page size. This is for HPUX 11.0. Wed, 05 Jan 2000 18:18:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/printer-control-codes/m-p/2417260#M765424 Mitch Nguyen_1 2000-01-05T18:18:52Z https://community.hpe.com/t5/operating-system-hp-ux/printer-control-codes/m-p/2417261#M765425 Assuming you are talking about doing it for all print jobs, and not just ones <BR />from a certain application, you would need to modify the printer's model <BR />script. Note that this is neither supported nor recommended by HP, but it has <BR />been done successfully in the past.<BR /><BR />The model script for a printer that is already set up resides in <BR />/var/spool/lp/interface (unless it's set up with JetDirect). Fri, 07 Jan 2000 11:59:32 GMT https://community.hpe.com/t5/operating-system-hp-ux/printer-control-codes/m-p/2417261#M765425 Dan Hull 2000-01-07T11:59:32Z