topic Re: truss command in Operating System - HP-UX

truss command

Lindsey Curtis — Fri, 07 Jan 2000 16:50:27 GMT

Does anybody know a command on HP-UX 11 that is similar to the truss command on
Solaris?

Melhem El-achkar_1 — Mon, 10 Jan 2000 01:56:24 GMT

There is no command like truss. I'm afraid. I searched some time, but without
success...

Lindsey Curtis — Mon, 10 Jan 2000 15:48:32 GMT

Sorry to hear that. Thanks for the response.

Curtis

Dan Hull — Mon, 10 Jan 2000 16:38:34 GMT

What does the truss command do? Perhaps there is another way to do it on HPUX.

Scott Pattinson_2 — Tue, 11 Jan 2000 05:42:35 GMT

use "trace" on HP-UX 10.20 which you can get from:
http://hpux.csc.liv.ac.uk/
or "tusc" for 11.x from
ftp://ftp.cup.hp.com/dist/networking/misc/tusc.shar
both are unsupported

Kiran Mehta — Wed, 12 Jan 2000 06:22:02 GMT

Here's a partial workaround: launch the program with dde and use the
dde-command "trace -entry"

-Kiran
-kirannmehta@yahoo.com