https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418675#M766064 How would I get/configure HPUX 10.20 to get file system usage using snmp? A <BR />pointer to the correct docs would do.<BR /><BR />Thanks,<BR />Aaron Bush Tue, 22 Feb 2000 12:27:49 GMT Aarton Bush 2000-02-22T12:27:49Z https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418675#M766064 How would I get/configure HPUX 10.20 to get file system usage using snmp? A <BR />pointer to the correct docs would do.<BR /><BR />Thanks,<BR />Aaron Bush Tue, 22 Feb 2000 12:27:49 GMT https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418675#M766064 Aarton Bush 2000-02-22T12:27:49Z https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418676#M766065 You might have better luck getting an answer in the Networking forum. Try there <BR />:) Tue, 22 Feb 2000 16:48:45 GMT https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418676#M766065 Dan Hull 2000-02-22T16:48:45Z https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418677#M766066 I have been able to get performance details from my HP-UX server over SNMP when <BR />I am using OpenView NNM. If this is your case then check the /etc/snmpd.conf <BR />file on the server you are trying and verify the <BR /><BR />get-community-name<BR />set-community-name<BR />trap-destination Mon, 28 Feb 2000 11:07:02 GMT https://community.hpe.com/t5/operating-system-hp-ux/how-to-get-file-system-usage-from-snmp/m-p/2418677#M766066 Steve White_8 2000-02-28T11:07:02Z