https://community.hpe.com/t5/operating-system-hp-ux/vgdisplay/m-p/2418831#M766077 I have a problem on a HP9000 that everytime the vgdisplay command with no <BR />options is performed, the system panic's and crashes. Anyone ever hear of <BR />this? Fri, 25 Feb 2000 01:41:38 GMT Steve Lindo 2000-02-25T01:41:38Z https://community.hpe.com/t5/operating-system-hp-ux/vgdisplay/m-p/2418831#M766077 I have a problem on a HP9000 that everytime the vgdisplay command with no <BR />options is performed, the system panic's and crashes. Anyone ever hear of <BR />this? Fri, 25 Feb 2000 01:41:38 GMT https://community.hpe.com/t5/operating-system-hp-ux/vgdisplay/m-p/2418831#M766077 Steve Lindo 2000-02-25T01:41:38Z https://community.hpe.com/t5/operating-system-hp-ux/vgdisplay/m-p/2418832#M766078 I would try two things to try and eliminate the actual problem. Type lvlnboot <BR />-v and ensure you have entries for root, dump, swap and boot. If this all looks <BR />good then look for patches that are designated for LVM on the HP web-site Mon, 28 Feb 2000 12:43:59 GMT https://community.hpe.com/t5/operating-system-hp-ux/vgdisplay/m-p/2418832#M766078 Steve White_8 2000-02-28T12:43:59Z