https://community.hpe.com/t5/operating-system-hp-ux/disk-device/m-p/2419677#M766308 Hello,<BR />Do you know which command on HP-UX 10.20 to verify the disk unused on my HP9000 <BR />- K260 - not by SAM.<BR /><BR />If so, how can I increase the size of my existing volume group by using this <BR />disk ?<BR /><BR />Thank<BR /><BR /> Tue, 14 Mar 2000 07:40:51 GMT Sy-hoang Truong_1 2000-03-14T07:40:51Z https://community.hpe.com/t5/operating-system-hp-ux/disk-device/m-p/2419677#M766308 Hello,<BR />Do you know which command on HP-UX 10.20 to verify the disk unused on my HP9000 <BR />- K260 - not by SAM.<BR /><BR />If so, how can I increase the size of my existing volume group by using this <BR />disk ?<BR /><BR />Thank<BR /><BR /> Tue, 14 Mar 2000 07:40:51 GMT https://community.hpe.com/t5/operating-system-hp-ux/disk-device/m-p/2419677#M766308 Sy-hoang Truong_1 2000-03-14T07:40:51Z https://community.hpe.com/t5/operating-system-hp-ux/disk-device/m-p/2419678#M766309 Hello!<BR />First check the disk with<BR /># pvdisplay /dev/dsk/c#t#d0<BR />if you don't know the device file name check this <BR /># ioscan -funCdisk<BR />if pvdisplay command display some wrong, then make disk as physical for LVM <BR />whith<BR /># pvcreate -f /dev/rdsk/c#t#d0<BR />then extend your volume group <BR /># vgextend vg## /dev/dsk/c#t#d0<BR />check with <BR /># vgdisplay -v /dev/vg##<BR /><BR />Now you can extend/create new logicals volumen<BR /><BR />God Lock!!!<BR /><BR /><BR /><BR /> Tue, 14 Mar 2000 08:56:59 GMT https://community.hpe.com/t5/operating-system-hp-ux/disk-device/m-p/2419678#M766309 Javier Juarez_2 2000-03-14T08:56:59Z