https://community.hpe.com/t5/operating-system-hp-ux/swinstall-invalid-target/m-p/2419695#M766324 While attempting to install a Patch via the UI, swinstall will not let me set <BR />root as "<SERVER_NAME>:\" . When I attempt setting it to the "\", I am <BR />prompted with a message indicating use of the pushAgent.</SERVER_NAME> Tue, 14 Mar 2000 10:53:06 GMT Edward Ianuzi_1 2000-03-14T10:53:06Z https://community.hpe.com/t5/operating-system-hp-ux/swinstall-invalid-target/m-p/2419695#M766324 While attempting to install a Patch via the UI, swinstall will not let me set <BR />root as "<SERVER_NAME>:\" . When I attempt setting it to the "\", I am <BR />prompted with a message indicating use of the pushAgent.</SERVER_NAME> Tue, 14 Mar 2000 10:53:06 GMT https://community.hpe.com/t5/operating-system-hp-ux/swinstall-invalid-target/m-p/2419695#M766324 Edward Ianuzi_1 2000-03-14T10:53:06Z https://community.hpe.com/t5/operating-system-hp-ux/swinstall-invalid-target/m-p/2419696#M766325 Verify that your system's name resolution and networking is working properly, <BR />especially if you are using DNS. Do an 'nslookup' on both the host name and the <BR />IP of the machine and make sure both come back the same. If everything is <BR />working, you shoulodn't be asked to specify root unless you're installing over <BR />the network using the push agent. Tue, 14 Mar 2000 16:08:24 GMT https://community.hpe.com/t5/operating-system-hp-ux/swinstall-invalid-target/m-p/2419696#M766325 Dan Hull 2000-03-14T16:08:24Z