https://community.hpe.com/t5/operating-system-hp-ux/juke-box/m-p/2422504#M766973 You need to load the correct drivers into the kernel for your autochanger and <BR />to correctly connect the SCSII cables.<BR /><BR />Ensure that your cable configuration is correct for your model device (it is <BR />different for different autochangers). You will find the cable configuration <BR />in the manual for the autochanger.<BR /><BR />Also check that you have the correct kernel drivers loaded. This is in <BR />Appendix B of the OB II Installation and Licensing guide.<BR /><BR />John Hancock Tue, 02 May 2000 19:02:40 GMT John Hancock 2000-05-02T19:02:40Z https://community.hpe.com/t5/operating-system-hp-ux/juke-box/m-p/2422503#M766972 We just install a juke box ( K460 10.20)<BR />ioscan you can see juke box<BR /><BR />Problem: In Omniback you can not see Juke Box.<BR /><BR />I will appreciate any info<BR /><BR />Thanks in advance<BR /><BR />Junior Tue, 02 May 2000 18:13:30 GMT https://community.hpe.com/t5/operating-system-hp-ux/juke-box/m-p/2422503#M766972 Junior Callender_1 2000-05-02T18:13:30Z https://community.hpe.com/t5/operating-system-hp-ux/juke-box/m-p/2422504#M766973 You need to load the correct drivers into the kernel for your autochanger and <BR />to correctly connect the SCSII cables.<BR /><BR />Ensure that your cable configuration is correct for your model device (it is <BR />different for different autochangers). You will find the cable configuration <BR />in the manual for the autochanger.<BR /><BR />Also check that you have the correct kernel drivers loaded. This is in <BR />Appendix B of the OB II Installation and Licensing guide.<BR /><BR />John Hancock Tue, 02 May 2000 19:02:40 GMT https://community.hpe.com/t5/operating-system-hp-ux/juke-box/m-p/2422504#M766973 John Hancock 2000-05-02T19:02:40Z