INFORMIX 731.UC2 - OMNI BACK 3.00

VALERIANO VILLEGAS JUAN — Wed, 24 May 2000 16:58:18 GMT

I HAVE A PROBLEM WHEN I MAKE RESTORE WITH OMNI-BACK

0:50:19 Physical Restore of rltab5 Completed.
10:50:19 Checkpoint Completed: duration was 0 seconds.
10:50:53 Checkpoint Completed: duration was 0 seconds.
10:50:54 Physical Restore of rltab3 Completed.
10:50:54 Checkpoint Completed: duration was 0 seconds.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Physical Restore of rltab6 Completed.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Logical Recovery Started.
10:51:05 Checkpoint Completed: duration was 0 seconds.
10:51:05 Start Logical Recovery - Start Log 4468, End Log ?
10:51:05 Starting Log Position - 4468 0x5b0e190
11:17:19 DBspace rllog1 not recovered from same archive backup as DBspace rootd
bs.

11:17:19 Cannot change to Quiescent Mode.

COULD SOMEBODY HELP ME ?

Re: INFORMIX 731.UC2 - OMNI BACK 3.00

Ivan Coenegrachts — Thu, 25 May 2000 06:40:11 GMT

Is it possible you did a restore of the root DBspace or a DBspace containing the physical log or a logical log file ? If so, you have to physically restore the root DBspace and ALL DBspaces containing a logical or physical log file as well.

As OmniBack does not control the backup (it doesn't decide what to recover), but passes parameters to "onbar", I would suggest using the command (f.e. "onbar -r" for full restore ; check the manuals).

Hope this helps ...

topic INFORMIX 731.UC2 - OMNI BACK 3.00 in Operating System - HP-UX

INFORMIX 731.UC2 - OMNI BACK 3.00

Re: INFORMIX 731.UC2 - OMNI BACK 3.00