topic Re: [Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied in Operating System - HP-UX

[Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied

Steven Sim Kok Leong — Thu, 01 Jun 2000 07:44:17 GMT

Hi,

Both
- $ORACLE_HOME/network/snmp/peer/master_peer
- $ORACLE_HOME/network/snmp/peer/encap_peer
are required by start_peer to launch the snmp daemon.

However, both master_peer and encap_peer are binaries which are not executable in HP-UX 11.00 even when the executable permissions are on and I am executing both of these binaries as root.

I checked through deja.com and apparently there is another who faced the same problem but no solution was posted.

Any solutions? TIA.

Regards.

Steven Sim.

Re: [Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied

CHRIS_ANORUO — Thu, 01 Jun 2000 09:39:31 GMT

Please check that the file owner is oracle and group to be dba with rwx permissions

Re: [Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied

Steven Sim Kok Leong — Thu, 01 Jun 2000 09:53:05 GMT

Hi,

The owner of the executables is: oracle:dba
The permission of the executables is: 755

Regards.

Steven Sim.

Re: [Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied

Steven Sim Kok Leong — Thu, 01 Jun 2000 09:58:58 GMT

Hi,

The owner of the executables is: oracle:dba
The permission of the executables is: 755

Regards.

Steven Sim.

Re: [Oracle 8.0.5/HP-UX 11.00] master_peer: Execute permission denied

Jeremy Dean_3 — Mon, 07 Aug 2000 11:52:47 GMT

I had a similar problem with Netscape fasttrack server binaries.

In this case the problem was due to incompatible PA-RISC version of the compiled code and the system (hardware). A real error message, "Executable file incompatible with hardware.", was only displayed when attempting to from ksh. sh just said "Execute permission denied."

Note: HP ship different versions of the PA-RISC cpu (processor) as follows
v1.0, 1.1, 1.1x, 2.0
where 1.1x is 1.1e, 1.1a, ...
Check your processor's PA-RISC version using
model
For HP-UX 10.20, grep the model in /usr/lib/sched.models
For HP-UX 11.00, grep the model in
/opt/langtools/lib/sched.models

1. True running the executable from ksh to get better diagnostics
2. Check the required version in the executable using
file /exe_pathname
where filename is the executable pathname

If necessary, re-compile the Oracle system libraries as described in the documentation.
See the cc(1) man page and option +DAarch and getconf(1m) man page's "getconf CPU_VERSION".

Alternatively, obtain *new* versions of the executables from Oracle.
Use the following command to determine the scope of the problem

find $ORACLE_HOME -type f -exec file {} ; | egrep PA-RISC1.1

-----------
See also the attached script which gives detailed system info for HP-UX, Solaris, AIX, DEC UNIX machines.
HP Model: D220 CPU: 1 PA7300-1.1e RAM: 640MB OS: HP-UX B.11.00
---
Note also the following compile/link message
(Warning) At least one PA 2.0 object file (hello.o) was detected. The linked output may not run on a PA 1.x system
.