topic SAM core dumps when i try to modify/view users in Operating System - HP-UX

SAM core dumps when i try to modify/view users

johnson — Thu, 01 Jun 2000 20:42:08 GMT

I get the following error when I try to view
the USERS in the Accounts section of SAM:

UNEXPECTED EXIT: process /usr/sam/lbin/samx -C -p
22698 -s users /usr/sam/lib//ug.ui exited with a non-zero exit status.

sh: 23478 Bus error(coredump)

I can however view/modify the GROUPS in Accounts in SAM.

Anyone have a fix for this? Is there a particular patch for this?

Thanks

Re: SAM core dumps when i try to modify/view users

rajsri — Fri, 02 Jun 2000 02:30:32 GMT

Hi
you have not give OS version
if its 10.20 apply patch SAM/Obam PHCO_18217 may be you can look for latest patch .

Re: SAM core dumps when i try to modify/view users

Sajith V Mannadiar — Fri, 02 Jun 2000 06:41:08 GMT

Hi,

This happens sometimes when all the filesets are not configured properly.

execute "/usr/sbin/swconfig * "

Once this is complete, invoke SAM and give a try.

Cheers

Re: SAM core dumps when i try to modify/view users

CHRIS_ANORUO — Fri, 02 Jun 2000 11:08:27 GMT

Update the latest SAM/OBAM patch for 10.20 is PHCO_19990, PHCO_18217 has been superceded by this patch.

Regards

Re: SAM core dumps when i try to modify/view users

Jason Luginbuhl — Fri, 02 Jun 2000 18:34:12 GMT

This is normally a result of unconfigured filesets. Try this:

# swlist -l fileset -a state | grep -v # | grep -v configured

If this command gives any output then you have unconfigured filesets (likely patches).

Correct with swconfig:
# swconfig *

Rerun the swlist command above to see if all or most of the unconfigured filesets are now configured.

After this completes rerun SAM and it should no longer exhibit the same problems.