https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452375#M770083 Thanks for your help Alex I will give it a try<BR /><BR />Regards<BR />David Wed, 11 Oct 2000 12:26:52 GMT David_15 2000-10-11T12:26:52Z https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452373#M770081 Not sure how to install netstation software (for a HP Envizex terminal) on a 10.20 HP-UX B180L Wed, 11 Oct 2000 11:27:44 GMT https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452373#M770081 David_15 2000-10-11T11:27:44Z https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452374#M770082 If its not the newer Envizex II model then you need to install enware version 7.11 or before, onto any unix host.<BR /><BR />The s/w comes in a range of flavours aix,hpux,solaris etc.<BR /><BR />For HPUX it's normally a .img file which swinstall is compatible with :<BR /><BR />So to install just run swinstall pointing at the hp10.img file be it on CD-ROM or other.<BR /><BR />If it's a newer Entria or Envizex II model then the same is true but it's enware2 aka netstation 9.11.<BR /><BR />Other points to note :<BR /><BR />The enware S/W ships on the applications CD's and is password protected/purchaseable<BR /><BR />For HPUX 11.xx there are separate versions of both 7.11 and 9.11 for 11.xx use ONLY <BR /><BR />To add bootp entries / config xterminal on server use SAM or run xtadm from the command line.<BR /><BR /> Wed, 11 Oct 2000 11:42:34 GMT https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452374#M770082 Alex Glennie 2000-10-11T11:42:34Z https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452375#M770083 Thanks for your help Alex I will give it a try<BR /><BR />Regards<BR />David Wed, 11 Oct 2000 12:26:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/netstation-software/m-p/2452375#M770083 David_15 2000-10-11T12:26:52Z