topic truss Equivalent in Operating System - HP-UX

truss Equivalent

Walt Watson — Fri, 10 Nov 2006 23:24:16 GMT

Is there an HP-UX equivalent of truss?

http://www.pugcentral.org/howto/truss.htm

Re: truss Equivalent

Patrick Wallek — Sat, 11 Nov 2006 00:47:16 GMT

Have alook here:

Tusc 7.8
http://hpux.connect.org.uk/hppd/hpux/Sysadmin/tusc-7.8/

Note the sentence: "This release also provides a truss command compatible with the equivalent Solaris utility."

Re: truss Equivalent

Yogeeraj_1 — Sat, 11 Nov 2006 02:44:31 GMT

hi walt,

in the url that you have mentioned above, it is already mentioned:

The HP-UX 11.0 equivalent command is tusc. For 10.20 & below, use trace-1.6. Both can be found at the HPUX Porting and Archive Center at http://hpux.cae.wisc.edu/

http://hpux.cs.utah.edu/hppd/hpux/Sysadmin/tusc-7.8/

kind regards

yogeeraj

Re: truss Equivalent

rick jones — Mon, 13 Nov 2006 12:47:02 GMT

Keep in mind that tusc's "truss compatability" is a 'best effort' sort of thing. It would be better (IMO) to lean the tusc-specific options and use them rather than rely on truss compatability.

Re: truss Equivalent

Walt Watson — Mon, 13 Nov 2006 12:51:10 GMT

TUSC it shall be! thanks all!