topic Re: Upgrading Diagnostics (STM) - how to? in Operating System - HP-UX

Upgrading Diagnostics (STM) - how to?

Johnny Damtoft — Mon, 18 Sep 2006 05:55:46 GMT

Hi,

I've been looking for an "upgrade-plan" for Diagnostics.

I have downloaded the latest Diagnostics (version: 11.11.17.02) and I have been reading the mans for upgrading from a prev. version.

Now I'm asking you. What is the right way to do this?
Do i need to backup data? Do i need to uninstall the current version, Do i need to install patches before or after the installation? Do i need to stop and start any services before and after the installation? (Just to mention a few things) :)

Johnny

Re: Upgrading Diagnostics (STM) - how to?

Sandy Chen — Mon, 18 Sep 2006 06:06:01 GMT

Hi Johnny,

Data backup is always recommended, perhaps you could create an OS backup too. The steps are as below:

- Stop All Diagnostics/EMS Daemons
* issue "/sbin/init.d/diagnostic stop"
* issue "/etc/opt/resmon/lbin/monconfig"
o Select K to Stop Event Monitoring
* issue "vi /etc/inittab""
o Uncomment the p_client-> #ems4:3456:respawn:/etc/opt/resmon/lbin/p_client
o Save the inittab file with ESC:wq! and issue init q to activate the changes
o Check if p_client is still running (ps -ef | grep p_client), if necessary kill the process (kill -2 [ process id])
* issue "/sbin/init.d/ems stop"
* issue "/sbin/init.d/emsa stop"
* issue "ps -ef | grep stm" to check that no processes are running anymore.
If you can still see processes, kill them manually (kill -2 [ process id])

- Remove the current software with swremove
- Install the new OnlineDiag Bundle
- Install recommended patches

regards,
Sandy

Re: Upgrading Diagnostics (STM) - how to?

Zeev Schultz — Mon, 18 Sep 2006 07:29:29 GMT

"swremove OnlineDiag" and swremove of EMS-Core, EMS-Config,EMS-MIBMon. Then,swinstall OnlineDiag

Re: Upgrading Diagnostics (STM) - how to?

Pupil_1 — Mon, 18 Sep 2006 07:35:26 GMT

It's always good to have a backup when patching, just in case. When STM is upgraded, diagmond will be automatically restarted and there is not manual process involved.

The link from which I downloaded B.11.11.17.02 is this.
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Re: Upgrading Diagnostics (STM) - how to?

Andrew Merritt_2 — Tue, 19 Sep 2006 05:58:33 GMT

Unless you are upgrading from a very old version, there should be no problems just installing the new version without removing the old one.

The only data I can think of that might need backing up is the config files, if you have made any changes to any of them, and the update process should spot that and save a copy of the changed versions, I think.

Make sure you also apply the latest patch for the version of OnlineDiags you are installing. For B.11.11.17.02, that is PHSS_35285.

Andrew

Re: Upgrading Diagnostics (STM) - how to?

Johnny Damtoft — Wed, 20 Sep 2006 02:57:47 GMT

Hi,

Where is the configs and "collect" data located so i do a backup?

After installing Diag., I am under the impresion that the patch PHSS_35285 is for HP-UX 11.23 only. Correct?

Johnny

Re: Upgrading Diagnostics (STM) - how to?

Andrew Merritt_2 — Wed, 20 Sep 2006 03:24:16 GMT

PHSS_35285 is for the A.52.00 release of the 11.11 OnlineDiags. What are you seeing that suggests it is for 11.23?

Have you made any changes to the configuration? If not, there's nothing I can think of that you would need to save.

Andrew

Re: Upgrading Diagnostics (STM) - how to?

Johnny Damtoft — Wed, 20 Sep 2006 04:06:38 GMT

Ups.

After checking it again, i saw that i have been reading the wrong line. I took the version number from 11.23.

Johnny

Re: Upgrading Diagnostics (STM) - how to?

Johnny Damtoft — Wed, 20 Sep 2006 04:26:36 GMT

Thanks guys, i think i got what i need..

Johnny