topic Re: /usr/lib/dld.sl error in Operating System - HP-UX

/usr/lib/dld.sl error

Greta Blamire — Wed, 06 Dec 2000 14:55:31 GMT

I made some major changes to the database, but none to the operating system, but since I have started getting these errors:
Any one have an idea what's going on? I searched the forums but didn't see anything on /usr/lib/dld.sl errors.
Of course the /usr/lib/dld.sl file is there and with correct ownership and permissions.
Errors:
crt0: ERROR couldn't open /usr/lib/dld.sl errno:000000023
.profile[66]: test: Specify a parameter with this command.
.profile[66]: test: Specify a parameter with this command.
.profile[68]: Cannot create a pipe.
thanks for your help!

Re: /usr/lib/dld.sl error

Carol Garrett — Wed, 06 Dec 2000 15:05:23 GMT

Looks like youve overflowed the kernel parameter nfile.
Use the dmesg command, what errors are listed ?
file: table is full ?

If so see how full using sar -v 1 1 and look for the file-sz column. Use sam to increase nfile and reboot.

Re: /usr/lib/dld.sl error

Alex Glennie — Wed, 06 Dec 2000 15:05:42 GMT

Re: /usr/lib/dld.sl error

Rainer_1 — Wed, 06 Dec 2000 15:07:05 GMT

this could be the cause of a file table overflow.
Look in /var/adm/syslog/syslog.log if you see there any releated messages.
If so you have to increase kernel parameters

nfile
and possibly also
nproc

This requires a reboot

Re: /usr/lib/dld.sl error

Rita C Workman — Wed, 06 Dec 2000 15:12:02 GMT

I found this....maybe it will help you

http://my1.itrc.hp.com/cm/QuestionAnswer/1,1150,0x09800559ff7cd4118fef0090279cd0f9!0,00.html

/rcw

Re: /usr/lib/dld.sl error

Greta Blamire — Wed, 06 Dec 2000 16:12:52 GMT

Ok, problem solved, thanks to Carol, Alex, Rainer, & Rita. Alex, you give new meaning to the phrase "complete answer"! Thanks again everyone, I think I'll reveiw all my kernal parameters now.