topic Re: sar in Operating System - HP-UX

sar

Jade Bulante — Thu, 14 Dec 2000 00:39:53 GMT

I would like to see how our system performance is by running sar so I used this command:

sar -u

It gave me these results.
%usr %sys %wio %idle
How come there is no numbers/rate showing how the system is performing?

I also ran this command and gave me this result:
device %busy avque r+w/s blks/s avwait avserv

Please let me know if I'm doing it wrong.

Thanks.

a

Re: sar

Tom Danzig — Thu, 14 Dec 2000 02:15:09 GMT

You need to specify an interval and count. To get CPU info every 5 seconds 5 times, use:
sar -u 5 5

Other useful reports from sar are:

-b Report buffer activity
-d Report activity for each block device
-w Report system swapping and switching activity
-q Report average queue length
-v Report status of text, process, inode and file tables

Re: sar

Greg Hall — Thu, 14 Dec 2000 04:27:50 GMT

Hi Jade,

sar -u without any interval/count parms should show you the current days data. But you must be collecting the data first. Do you have any files in /var/adm/sa? Are you running the sa1/sa2 scripts via cron? See the reference manuals for full details but something like this:
0 * * * * /usr/lib/sa/sa1 900 4

will give you 15min intervals, 24 x 7. There are many ways to configure the collection, hourly, 15 mins, vary it overnight or at weekends, whatever suits your environment best.

greg