topic Re: A4800A scsi adapter in Operating System - HP-UX

A4800A scsi adapter

Paul T. Cardullo_1 — Tue, 01 Aug 2006 09:55:21 GMT

Can any one tell me if the A4800A single end scsi adapter will work with hp-ux 11.0 and if so is there any additional driver needed.

IOSCAN see the carc, but does not recognize anything connected to it

Thanks

Re: A4800A scsi adapter

Patrick Wallek — Tue, 01 Aug 2006 09:57:44 GMT

What does 'ioscan' show? Is it "CLAIMED" or "UNCLAIMED"? If "UNCLAIMED" then you definitely need a driver.

Re: A4800A scsi adapter

Torsten. — Tue, 01 Aug 2006 10:44:53 GMT

You need a proper termination at the end of the bus.

Re: A4800A scsi adapter

Torsten. — Tue, 01 Aug 2006 11:02:25 GMT

more info:

http://docs.hp.com/en/A3725-96031/ch02s06.html

*each* end must be terminated:

http://docs.hp.com/en/A3725-96031/ch01s01.html#bbadhchh

Re: A4800A scsi adapter

Andrew Rutter — Tue, 01 Aug 2006 12:13:06 GMT

hi paul,

The A4800A scsi card is not SE scsi! that is why it will not see anything attached.

The A4800A is a FWD scsi adapter and must have High Voltage Differential devices connected.

Andy