parcreate error

mark.M — Tue, 20 Jun 2006 01:14:50 GMT

DB[/]# parstatus -V -p0
[Partition]
Partition Number : 0
Partition Name : Partition 0
Status : Active
IP Address :
Primary Boot Path : 1/0/0/3/0.6.0
Alternate Boot Path :
HA Alternate Boot Path : 1/0/1/1/0/4/0
PDC Revision : 3.88
IODCH Version : ffff
Cell Architecture : Itanium(R)-based
CPU Compatibility : BCB-0
CPU Speed : 1500 MHz
Core Cell : cab0,cell1
Core Cell Choice [0] : cab0,cell1
Total Good Memory Size : 12.0 GB
Total Interleave Memory: 12.0 GB
Total Requested CLM : 0.0 GB
Total Allocated CLM : 0.0 GB

[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell1 Active Core 4/0/4 12.0/0.0 cab0,bay0,chassis1 yes yes 0

Notes: * = Cell has no interleaved memory.

[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis1 Active yes cab0,cell1 0

DB[/]# parstatus -c0

[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Inactive 4/0/4 12.0/0.0 cab0,bay0,chassis0 no - -

Notes: * = Cell has no interleaved memory.
DB[/]# parstatus -c1

[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell1 Active Core 4/0/4 12.0/0.0 cab0,bay0,chassis1 yes yes 0

Notes: * = Cell has no interleaved memory.

when i use parcreate error ....
DB[/]# parcreate -c0:base:y:ri
Note: It may take a longer time for the partition to boot if
any cell is performing power-on selftest.
Error: None of the specified cells have core I/O.
Note: Attached core I/O may be undetected if the cells are performing selftest.
DB[/]#
what is mean????

Re: parcreate error

Enrico P. — Tue, 20 Jun 2006 03:09:27 GMT

Hi,
to create a partition, the cell need to be connect to an IO chassis which have core IO card. Core IO card, generally present in slot 0, permit the console access to the partition. Generally this card have one serial and one lan connection.

Enrico

Re: parcreate error

Mridul Shrivastava — Tue, 20 Jun 2006 04:25:49 GMT

If you are creating a new Npar then It should have Core I/O,a nd boot path should be mentioned while creating Npar. Please refer man pages for parcreate for more information.

topic Re: parcreate error in Operating System - HP-UX

parcreate error

Re: parcreate error

Re: parcreate error