topic HBA controller with same part number? in Operating System - HP-UX

HBA controller with same part number?

Marius Pana_1 — Fri, 26 May 2006 05:58:04 GMT

Hi all,

I have someone who says that they purchased 2 x A7173 SCSI HBA controllers. They installed them and they say that running the command ioscan returns:

ext_bus 6 0/6/1/0 mpt CLAIMED INTERFACE SCSI Ultra320 A6961-60011
ext_bus 7 0/6/1/1 mpt CLAIMED INTERFACE SCSI Ultra320 A6961-60011

Is A7173 the same as A6961? The manual they received with the server is B2910-85000 and in it it mentions A6961-60011
but the installation manual for the HBA's ( HP A7173 PCI-X DUAL CHANNEL Installation Guide ) specifies that the output of ioscan should be:

SCSI Ultra 320 A7173-60091 :

ext_bus 6 0/6/1/0 mpt CLAIMED INTERFACE SCSI Ultra320 A7173-60011
ext_bus 7 0/6/1/1 mpt CLAIMED INTERFACE SCSI Ultra320 A7173-60011

Anyone have any ideas whats going on?

Re: HBA controller with same part number?

Steven E. Protter — Fri, 26 May 2006 06:26:01 GMT

Shalom,

http://docs.hp.com/en/A7173-96006/ch02s12.html

http://docs.hp.com/en/J6373-90008/ch05s05.html

Second link uses a utility to verify the part. It would appear to me that these parts may be the same.

SEP

Re: HBA controller with same part number?

Ninad_1 — Fri, 26 May 2006 07:10:37 GMT

Please refer to this link
http://docs.hp.com/en/AB331-90007/apas01.html

It is the same part

Regards,
Ninad

Re: HBA controller with same part number?

Marius Pana_1 — Fri, 26 May 2006 07:51:55 GMT

Thanks guys that was it!